Viewing all customer Discussions for:

15-181 Double Support Detent Clip

My window uses dual coil balances as shown in the images. Two of the coils broke on my window(one on each side) and I'm not sure what the right replacements would be, all the coils are stamped with a number 4 and are 1/2 inch wide. Which coil could replace these? I'd also like to know if repla ... (cont.)

Pictures of needed parts are attached. I'm a Builder and Apartment Building Owner. I need a bunch of these for tenants Windows ASAP.

To whom this may concern, I have a customer that had the coils on their window broken. In the picture attached, I need to know where I can find a replacement of this whole part. Thank you, Kevin

The part is some kind of double h

regarding replacement pivot pins for home double hung windows installed in 2009.

I need a replacement for this coil balance

Hi, have an M&I double Hung window mo0del 380DH series and the right hand (as you face window inside) has broken. You can see by the photo. The other has the warranty and serial number: 380DH series double hung window Warranty 2081481.3 380 H-R25-47x73 AAMA/MWWDH101/1.5.2.97. Looking for one two ... (cont.)

I would like to replace a broken coil balance part for my upper window sliding mechanism.

Existing parts are less than 1 1/4' in width. I measured it between 3/4 and 5/8 of an inch. I am returning 1 1/4; do you have the right replacements?

Found on Window: Allied Systems Corp 334/4 x 763/4 9-8500 2004-8-20 72934 2862EQ5/8 Flat 9/9; WH49/16cel Bar code: 12304789.2.1.10 The picture shows the broken plastic housing with a circular insert. In a normal operating window the plastic housing w/ spring attached would be at the botto ... (cont.)

Where can I buy a replacement for this item? I believe it is from an mmi window.

Please help me ID these coil balances. The windows are approximately 13-14 years old and are single hung. There appear to be different balances on each side and the metal part is marked with a "4". The window sash falls closed and will not stay open. Thank you for your help!

In search of a new coil balance to match the attached pictures.

Just need one It is about ten years old.

I pulled out one of the broken heart would like to mail it to you in order a dozen pieces probably

I need 6 window balancers. I'm not sure what brand of vinyl window it is but it is builder grade for a 21 year old house. The metal tape is stamped 540. That is the only identifying number. Can you help me identify what parts I need?

I'm unable to find the plastic window shoe to replace this one

This balance and pivot pin are from what I believe is a Capital double hung window. The upper sash weighs approximately 17.2 pounds the lower sash 18 pounds. This double coil balance is installed to carry the upper sash, the lower sash has a single coil balance. Both pivot pins have a T head The h ... (cont.)

I NEED YOUR HELP TO IDENTIFY THIS PART FOR MY TILT VUNYL WINDOW.

Can you identify this window coil balance? The plastic cam is broken, I'd like to find a few replacement assemblies. Thanks! Doug