Viewing all customer Discussions for:

S390-34 34" Series 390 Channel Balance

Hi, Could you please help identify the correct balancer and weather strip I need for my non-tilt window? See attached for existing balancer. Below is the measurement I took: The channel width is half an inch. The width of the bottom shoe is 1-1/8" The weather strip is 9/32" X 1/8". Do you have th ... (cont.)

My balance is 34" long (just the metal) it has a stamp 33kb5 (see pic.) The spring measures 28 5/8" long. It is 1/2" wide.

Hello, I would like to purchase couple of window balance with 33-3 stamp. Attached you can find the pictures of ends and stamp. Can you please let me know the guide numbers and how to place the order? Thanks, Omid

I am looking for a channel balance with the stamp of 3390 they are 34" long. there are 4 per window my name is Leeany help would be great. thanks

This is 34" metal length 1/2" wide "Caldwell 33 2 BN" (see picture) that is for a 34"w x 36"h window that is approx 20lbs. I am looking for the equivalent replacement part It's over 25 years old

Balance is stamped - "333 3" CALDWELL Length without end pieces is 34" Channel depth is 9/16" Channel width including rolled edges is 9/16" Channel width excluding rolled edges is 1/2"

I'll need 8 window balancers. The length is 35 " overall, the metal section without the plastic ends is 34" long. The width is 9/16" and the height is 5/8". Will also need 6 plastic stops that screw into the top of the sash, there are right and lefts. Will need 3 each. The square top is 7/8"×7/8". ... (cont.)

Have channel with 3330 BSI stamp. No wings on shoes. 34length and 9/19=1/2 industry per your site info. Will the S385-34 wings get in the way? Can I trim them if they do? Thanks Jim

Need some help on a 1/2" block & tackle, non tilt balance. Your part # S390-34 will work with 50 weight number, but I need (2) each that the tube actually measures 34 3/8" long. Can you guys get these? Let me know if any questions.

I have 2 windows in need of balances. 34 inch length, 1/2 width. Also need clip to mount to windows. What,concerns me is there are two,different style top clips and these are all Jordan windows. Can you help?

I had a post yesterday, but it seems to have disappeared. Can you help identify this balancer, I had originally thought it may be a 351 series, but I believe I was measuring the boot incorrectly. Size is 34 inches (metal to metal) Thanks

Hi, I am in need of replacing a window balance with code #3390. Based on your forum I may be able to use one of these products. Two questions I have:I am unable to remove the window completely because the shutters installed does not allow me enough space. Do you know if I can install the balance wit ... (cont.)

Dear Swisco, Could you kindly tell me which part I should order to replace this balancer 2740 FL? more details in the attached images. Many thanks Frank

I need a Channel Balance for a non tilt window. It is 1/2" Wide & 34" long excluding the plastic ends. It has 33 4 KO CALDWELL stamped on it.

I need two of the 1 5/8" sash locks, and Channel balances 34 1/2" 6 32" 2 The balances are odd size don't know if I should get the shorter ones or the longer ones( the ones that are 341/2

Attached are pictures of the current balancers. The sashes do weigh 50 lbs and the customer does not want them to sag, so it is important we get the right weight of spring in them. Just to remind you this is an excerpt from my original email to you: "I am looking to match up a channel balance. The ... (cont.)

I think the series 390 balance 34" long would match the old one but the only marking stamped on the original is k 33-3 and I'm not sure how that corresponds to the weight rating if at all. Also the 1/4 inch wide spring clip on the side of the window broke off and I'm not sure how to remove ... (cont.)

Hello, I sent you 2 pictures of my window channel balance. The first picture is of the top and the second one is the shoe. My balance length is 34'. How much money is the shipping to Florida going to be and when I can get it if I order the balance later today? Thank you very much. ... (cont.)

The attached pictures are for a Jordan window block and tackle assembly. The metal channel piece is 34" in length. Please help me identify the correct replacement part. The shoe dimension is right at or just over 1". Please email or call as soon as possible. This is a critical fix that I have ... (cont.)

Would you please help me determine the correct channel balance for my application? It is a 9/16" (1/2") steel channel. The steel channel measures 34 inches in length. the numbers stamped on the channel are 33 16L. Pictures attached. Thanks.