Viewing all customer Discussions for:

23-113 Bi-fold Bottom Door Pivot

I need another kit like this

How to I fix or replace this. My mirror door does not sit in tracks on top

These pictures correspond to a Stanley 36" Bi-Fold mirror door. I used 2 for my closet. The guide wheel broke on the bottom left and my adjustment and my bottom pivot that adjust doesn't adjust now! All the guides and pivots fit in Stanley #4405-R if that helps. I could us one bottom track, 2 new gu ... (cont.)

I understand that acme 17 -4405 has been discontinued. Here are photos of a 48" and 30" inch set of mirrored bifold doors to repair. I believe I could use 3 screw driver bottom 21-092 6 pivot blocks 23-181 3 bottom drivers with rollers Am I missing any hardware that you might see from t ... (cont.)

Are there replacement parts for the internal bifold door frame brackets that house the pins. It appears these brackets are removable due to the philips head screws. The bifold door pins have worn out the plastic pin housing brackets causing the bifolds to sag when the bifold doors are in the open po ... (cont.)

I have about nine ACME folding doors in a home we just purchased in FL. They are all in varying states of operation and all apparently due to the missing peices of hardware. I took photos of the one that does indeed work, see attached, in the hopes that you could identify replacement parts for me. T ... (cont.)

I am looking for replacement parts for a Stanley Mirrored bi-fold closet door. I need the floor channel and the four roller assemblies that fit in the corners of the inside of the doors. Channel is 24 inches long, 1 inch high and 1 inch wide. Roller assemblies have the number 4405-R . Please h ... (cont.)

Missing the screw type metal bottom guides, I only have one that is in the picture.. need 3 but 4 would be fine. Also 4 to 6(extra) round plastic circle guides will do it! The 4 top spring are still functional!

The gray screw keeps coming out of my track and the roller. Help

Part Number 7-4405

Looking for help with bifold hardware need the top assembly spring mechanism along with pin that goes in the door as well as the pin that goes in the bottom of the door that goes in the track. Pictures attached. Thanks

Upper and lower pivots for two stanley 24 inch mirrored doors. They are separate, not set up as a 48 inch door. Has upper and lower tracks. I need all the pivot hardware to fit in the plastic corner blocks to adjust them to open and close properly.

I am looking for the base plate for a pivot pin matching 23-113. 23-301 appears to take a geared pin, not a smooth one. Will this part work or do I need a different one?

How do you adjust 23-113? I tried turning the nut with pliers but it's tight in both directions and the pin doesn't move in or out. I wound up using the plastic version but I think the doors might be too heavy for that one.

Hi I am attaching pics of my bi-fold door guides and would appreciate if you can let me know which of your products will serve as replacement. The problem is that the closet doors have fallen out. So do I need to replace the bottom & top guides or just the top ones. I have four closets. Thanks ... (cont.)

I am seeking the plastic part . that goes on the top of the "top slide" for a bi folding door. most of the ones i viewed have a round wheel at the top , but i am seeking a hardward piece for an older bi fold door which at the top of the slide has a small"square " plastic piece which allows the d ... (cont.)