Viewing all customer Discussions for:

23-121 Top Pivot Guide, 7/16" Diameter

Can you help me identify this part?

My best guess on the originaal install on these would've ben early to mid 80s. This is from a heavy metal bi-fold door. Barrel is 3/4", pin is 1/2". Not sure what size that end cap is supposed to be. It's very well worn. No names numbers or markings on the pin, door, etc. Sorry, they were alread ... (cont.)

Need Hardware as shown in the pics for the door

Can you tell me if you have this part in stock? This is for a bifold door. Part is 1/4" x 1 5/8" long.

Hi All, Got a by-fold door at one of my customers, most of the parts are malfunction. Have you got an agent here in Melbourne Victoria Australia? The top roller is missing not sure how that looks... Thank you for your help. Best regards Viktor

Need to find a new track for my doors. The pin in the corner is 7/16 pin and the roller that it slides on is about 5/8 inches. It says johnson on some of the parts and is a low profile track.

Initially had trouble with the extending part of the door slipping out of its track. Now the fixed part has dislodged and can't put it back in. What do I have to do/buy to get this fixed?

This goes in the top of a folding, sliding, closet door. It sits in a hole in the door and is held in a track. The top of the screw broke so it no longer stays in the sliding door track. The top part of the screw, rotates/rolls, horizontally, going forward and back in the sliding door track. Let me ... (cont.)

Hello. Having trouble finding this hardware to put it back on my bifold doors to put them back up. Tried Menards and Ace hardware and no luck. Thank you for any information you might be able to provide.

Hello,We are looking for a replacement track for our 1970s-era bifold doors (48" opening). I've attached a photo of the top and bottom ends of the doors hoping you could tell me if this item would be the correct item to order: https://www.swisco.com/track-48/pd/Wood-Folding-Closet-Door-Replacement-A ... (cont.)

Hi there, I can't seem to find replacement pivots for an old steel mirror bi-folding closet. The base is 7/16 but my track opening is 3/8, which means the nylon has to be somewhat smaller.

1963 home. The bifold doors are hinged like a traditional door. The one keeps jumping off the track and the plastic piece that holds the track to the jamb appears worn. The long plastic slide sits in the track and that's what the door pin sits in. Track is only on the top. No track on the bottom. ... (cont.)

I have bifold door that came out of a closet in our bathroom. It was removed a while ago and was not the one that removed it. I installed the door in another room but don't know how it is suppose to be assembled. The part I am trying to figure out is the top pocket socket part 23-307. When I t ... (cont.)

Hello! I have bifold doors installed, but want to replace the track with the brown one (23-450). I plan to re-use the bottom hardware. For the top part of the door, I assume I should get new hardware from you. Is my understanding correct, that along with the track 23-450 I'd need a top pivot guide ... (cont.)

Im looking for a swivel wheel that will fit the track #23-453

Which top roller guide goes with part 23-456?

I lost a support part for my folding closet door.Now when I open and close the door, it's not supported and scratch against the bottom railing. I must lift the door by the door knob to open and close it.Nothing supports the door spring.valerie C

looking for a couple of parts, information that I gathered from the top pivot Guide,the spring loaded one has a pat. No. 3397790 and Pat.Can. 1970. The parts that I'm looking for are the ones on the picture d and e. or other parts that will do the same job.The one on the picture d runs free on the s ... (cont.)

Looking for help with bifold hardware need the top assembly spring mechanism along with pin that goes in the door as well as the pin that goes in the bottom of the door that goes in the track. Pictures attached. Thanks

I need a replacement top pivot pin for some bifold doors. I don?t know the brand. The doors are about 20 years old. They fit into a 3/8 hole.