Viewing all customer Discussions for:

26-355 Pivot Bracket

Looking for replacement part.. Double hung window pivot lever (pawl)

I have broken ballast parts for MW double hung tilt windows. I would need a replacement spring, a tilt pivot, and the plastic shoe that the pivot engages. Do you have any applicable parts? Alternatively, is there an entire sash replacement that works with these windows?

The tip has broken off of this sash pivot pin and I need to replace it. Inscribed inside is: A-S NYC 6254 1

Not sure the brand, but it's what's on the bottom of the sash that snaps into the window frame.

Many years ago (30 years or so, because they were installed prior to our ownership) the double sash windows were retrofitted. The sash ropes were removed and a plastic channel was installed in the window frame. The metal pivot pins are "hammered" into the sides of the sash and travel in the channel. ... (cont.)

Looking for replacement window pivots for 40 year old what I believe are Season-all windows. Pictures are attached. Do you have anything that will work? Let me know. Thanks. Tom

Hi, These threaded pivot pins have rusted threads and I need to replace multiple ones. Thanks for the help. Bobby

This is from a 1970's vintage window sash. The first photo is the pin receiver bracket attached to the spring. The next two photos are the top and side, respectively, of the sash pivot pin. I need six sash pivot pins. Please advise.Tom

this is on an older wood sash, circa 1992 and is to be "nailed" or pushed so that the barbs go into the sash. The other end then sticks out and is what connects into the pivot shoe in the track

Our customer said this is some kind of tilt latch in his window. I'm guessing it works with the balances possibly, but could be completely wrong. It is about 2" x 1 3/16" with a number on the bottom that reads 8959 along with A-S.

Our house was built in 1979, I think the windows are Anderson, this is a picture of the sash pivot, the part on the bottom that slides into the window track is broken on some of the windows. I am looking for replacements, either the original or something that will work. Please let me know if you h ... (cont.)

Looking for these two parts for a double sash window. The house was built around 1980. No markings on the window as to who manufactured them. Thanks, Gary

Looking for a sash kit for an old MWR double hung window sash

Good morning. I've attached two pictures of pivot pins that need replacing. Would you please let me know if you have a comparable part? Thank you Craig

I have attached pics of a pivot pen which is made of metal that I would like to obtain from you or something similar to use.Thank you in advance for your help.Jimmy

15-045, 15-134, 15-218 may fit or I can make them fit, but what are compatible Pivot bar that goes with them ? Old measurement is 3/8" thick, 1" width, flexible height (can work with 2"). Preferring side mount, alternatively which shoe can work with 26-402. Thanks,

I have MW double hung windows that are 20 years old. One of the windows no longer stays up (it slams down). I took out the window and one of the parts on the side of the sash is broken. Pictures of the one on the other side are attached. I need to get this part replaced. Do you have it? Will I need ... (cont.)

I've attached two photos of sash pivot clips. Do you stock these?

Received part from customer. He says they are from Therma Tru Windows. The pin that goes into it is also broken. Any idea if they can be bought separately? I have no markings or numbers.

We think is a window rivet guide. Need to replacements part.