Viewing all customer Discussions for:

39-528 14-1/2" Casement Track, Truth

I need left and right side and cover

Looking for the black slide for the window arm.

Hello, my name is Scott. I was hoping you could identify this part and get me a replacement. Let me know your thoughts thank you very much. Much appreciated. Have a great day.

Hello, the wheel/roller on the end of the arm is broken. Don't know if you can just get the wheel or if you have to purchase a whole new unit. The arm is about 9" in length and the channel on the window is about 14.5". Can you make a recommendation?

I have a casement window approx 46"X33"X3". The parts are rusted, broken. I need the following pieces: Pic #1: The crank operator housing is 5" in length; the gear of Crank Op w/ 2 extending arms, (1 straight, 1 bent at elbow), sits atop silver plate 5" long secured with screws 1.5" apart. Btm ... (cont.)

I have a casement window I was taking out to replace rotted wood and the window fell out of the frame bending all the brackets. The truth hardware has numbers. Here is what I can find. 31858 41012 However I can't seem to find everything I need. The metal sashes and the black plastic clips I need as ... (cont.)

Hi, I'm in search of replacement parts for my four Jeld-Wen casement windows at my beach house. All have signs of rust and need to be replaced. Can you assist will selling me the correct parts?

Sorry! Last email I didn't attach photos. Need help on on identifying the parts, please. My name is Mary.

There are no numbers on this operator. I measured each arm pin to pin. I tried ordering one already but it didn't fit.

long arm 41011, short arm 31876, made in USA on 09/17/01

I would like to replace the operator and Hinge set on a Milgard Vinyl Casement window. Can you point me to the right replacement parts. on the hinge set that attaches the window frame one has the number 40986 and the other has the number 40987, assuming one mounts to top of frame and the other to th ... (cont.)

Hi I can use your help Need replacement parts for two windows

I am in need of one left hand and one right hand Hurd Casement window operator. Please see attached info.

I'm looking for two parts for this window. First, it's missing a handle. Second, it is missing a clip/part that keeps the arm in the track of the window. Do you have any parts that will work?

The window will not close the last 2 inches because the teeth on the gears have worn down.

Hello, Im looking for an operator in replacement of my 1496-320. Do you have one that will fit. Thanks

Can you confirm if this is a 39-439B?If not can you identify it?I need just one ASAPThanks,Ed

This window was ordered through American Craftsman they are operational windows that crank open outwards

I need to identify the window cranking arm (3 attached photos) so that I can order a replacement (actually 2 replacement arms). Visible numbers appearing on the interlocking arms are S-1491-165 and 1445 8S.

To Whom it May Concern:The number 41011 is stamped on the underside of the long arm. There are six mounting screws, equally divided on the crankset mounting flange.Best wishes,Thomas