Viewing all customer Discussions for:

26-360 Tilt Sash Pivot Bar, 2-1/2"

I have searched everywhere for these. they came off vinyl sash windows (lower sash) and I have no idea who made the windows.

I bought 23-360 thinking it would be close enough but it didn't work, any suggestions?

Not sure I am using the correct terminology....But the aluminum pin and the sliding plastic piece it plus into are broken on the tilting bottom sash of these double-hung windows. They were purchased in 2009. My documentation calls them "LBL Finale" and "Cascade/LBL 9100 Series" The windows sashes ... (cont.)

WE purchaseed an old home several years ago and the windows have been replaced with vinyl windows. SEveral windows have broken sash pivots, see photos. The pivots appera to be the same for left and right sides. The pivots are approx. 2.5" with 2-holes that are approx. 0.75" apart.The pivot off se ... (cont.)

Good morning, I am trying to find this kind of pivot bar, i hope i can get it from you, by the way ,the photo i took of the pivot bar is broken ,i hope it helps. I appreciate your help in advance.

Please help find a suitable replacement pivot bar. The other one of this pair is broken in half.

26-360 is not correct, can only use 1 screw. Need 2 of original.

1"x3" Millco right and left track latch with mounting screw holes 2 inches apart. Zinc diecast pivot bar (I do not know if the part is handed). Approx 2.5" OAL x ~5/16 wide x ~3/16 thick. Holes are ~11/16" apart and one hole is ~1 5/16 to 1 3/8" from the flared end.

I am currently looking for these parts for an IWC pivit window that is 29 wide x 39 Long.

has # 2311 on it.

I have checked numerous windows in my house and I have come to the conclusion that I need the following parts to replace my broken ones 26-243 Left Latch (x7) 26-244 Right Latch (x7) 26-360 Pivot Bar (x4) 15-194 Balance Shoe (x24) S795-34C Window Balance (x2) but I am going to need the 15-194 balan ... (cont.)

I am looking to get pivot pars for my windows that look similar or serve the same purpose. Attached pics of the existing ones. It has a number 10 etched on the top side.

I am look to order some of your Series 795 Balances with 15-198 hooks and a 15-194 bottom shoe. Here are the stamps and quantities I am requesting: 22B - 8 26C - 8 28C - 4 30B - 4 30C - 4 36C - 12 Also, can you please recommend a replacement for the pivot bar and the tilt latches pictured above. ... (cont.)

I would like to get several pairs of these pivot bars as well as a couple pairs of the tension springs. Thank you!

Hello, Looks like I need both tension rods, the slider/tilt and pin and the tilt latch. Any help would be appreciated. Thanks, Tom

Pivot Bar is approximately 2.5" long and has "1001" stamped on it.I would like to purchase approximately 10 pivot Bars.The windows are plastic or PVC. What should I use to lubricate the sides and insides, so the windows travel up and down easier.

Need to order a few of these items

This looks just like it, except the hole spacing is not the same. This is my final chance, then I guess I will have to machine my own. Only marking is a number 6. Just moved into home and do not know what brand my windows are.

I believe it is an Anderson window. Any suggestions?

this pivot bar is 2 3/4 long