Viewing all customer Discussions for:

38-096 Maxim Multi-Point Lock, Long Slider

Hey! I am looking for this window replacement. I tried to measure it 1-1/8in 1-1/4in Inside length: 4-1/4in Full length: 4-5/8in Do you have any lockers like this? Thank you!

windows installed in 2007. The latch is broken. Picture of the inside of the latch taken from the outside of the window. Color white.Tom

need white cover for the operator and new handle need piece that attaches to window need complete locking hardware and handle part too

Window casement handle multi-point, white, with the 4 marking

Hi there. I'm wondering if you can help me on the following...I can only get my locking mechanism about half way down (provides a seal), but it doesn't pull all the way down on the tie rod, so am just not sure if there is anything I can adjust to get this locking mechanism to full lock closed. Tha ... (cont.)

I have a few windows with broken cranks and locking arms. I'd like to purchase new hardware and installation instructions?

Left lock handle for bay window , . Dimensions- height 4-5/8 x 3/4"width

I need to replace a casement window lock handle and want to make sure I get the right part. It is beige and I am wondering if your Maxim Multi Point Lock Long Slider is what I need. Overall length of my part is 4 5/8 inches. Fork is 1 3/8 inches. Please see attached pictures and let me know. Thank ... (cont.)

Looking for casement lock replacement. Is part number 38-096 correct? I measured the lock distance and it appears to be "long" at 1 7/8".

wondering if you have this part for my window, same color if posible

This handle broke the other day and the window manufacturer states the do not have a replacement as this handle is obsolete. Do you have anything that will replace my broke one?

Hi, I am looking for this lock- it is 4 1/2 " long, holes width is 3 3/4" and gray u shaped mechanism is 1 1/4". Thank you.

I attached a picture of the new handle and broken one

I have a vinyl window casing with the right lock broken and looking for a replacement part. The series window is a Jeld-Wen 8630 PW. I see there are several parts that look close to what I need; however, I'm not sure. Thanks in advance for any help you can provide. Thanks.

I'm looking for a Truth brand locking mechanism for the window pictured here. The crank is working, but the locking part broke.How would I order this part?

THE STICKER SAYS THESE ARE PLY GEM 700 SERIES. DATE ON STICKER IS 2002. THE HARDWARE PICTURED IS NOT DAMAGED. WE ARE REPLACING OTHER HARDWARE THAT IS DAMAGED. CAN YOU HELP ME IDENTIFY THE PART NUMBERS?

Hello I have identified Maxim multipoint lock, long slider 38-096 as the most likely replacement for my broken item. I have verified all available dimensions on the 2 plans shown on your webpage. Before I order 2 of these I attach 2 additional dimensions which I have taken - please see attached pict ... (cont.)

I don't know the window manufacture these are older window and I need new cranks.

Hello, I forced the lever and broke off the mechanism and the whole part needs replacement.The mechanism is brass in color. White would be preferable. A set would save me painting the other side which still functions-not a big deal, what are my choices? The part is 4.5 inches x 3/4 overall. When me ... (cont.)

Hi I would like to know which part I should replace this part with. I'm a bit unsure which part replicates the one I have right now. Please advise!