Viewing all customer Discussions for:

82-239 Multi-Point Mortise Lock and Keeper, 9-7/8"

I ordered the swisco 82-239 on order number 1266000. But that's not the right one. What do you recommend?

hello, please let me know part number which i can get as replacement of attached.

Mortise body is stamped with "May 05" and patents 6.264.252 and 5820.170. I need the exterior cover plate and interior latch for this mortise lock. The finish on the handset is stainless steel or brushed nickel.

Trying to replace the above part. Everything else works fine..

Locking latch spring is broken. Need to replace the whole mechanism? Pls advise urgently. SD-R20-2426x2426 (96x96). Waiting to hear from you guys urgently. Thanks. 1408-270-6343

Need assistance identifying the replacement part for the attached pictures. 9.75" Long Locks inwards. Window install company mentioned a part number of PM526A-WHITE. Thank you in advance for your assistance.

I purchased a part from your site that we thought was the same as the attached pictures but we chose wrong. Can you please assist with picking the correct part?

From the measurements, it seems like this lock should work for me, with the keeper installed on my door. But my previous lock didn't have the anti-slam button, so my faceplate that I would need to re-use doesn't have a hole for it. Would the faceplate be enough to hold down the anti-slam button so ... (cont.)

My lock is from a Lowe's sliding glass patio door. It is a MULTI-POINT MORTISE LOCK , very similar to your Product Code: 82-239 (but on mine the face plate is separate. The difference is that mine has a 5 1/4" gap between the closest edges of the hooks, while your description for 82-239 shows a 5 11 ... (cont.)

The lock mechanisim is 10 inches long, 1/2 inch where the latches come out from (photo 3854) and one inch and a sixteenth deep (photo #3851). Photo #3851 also shows that it's slightly angled at each end of the mechanisim

Do you guys have by any chance this same lock and keeper made of stainless steel?

Need a replacement for the patio door. One of the hook wouldn't come out and is stuck inside the unit.

Good evening,I have a vinyl patio door with this etched in the left inside corner:PPG Herculite KTempered Safety GlassIBCFA1201 CII 3mm ANSIZ 97.1 - 2004 UA5GCC - 110 4021 279115.41On the part that needs to be replaced it reads:PAT#: 6.264.252 PAT#:5.820.170 on one sideJAN 12 is on the other ... (cont.)

No name or ser.no. printed on sliding patio door lock. Can you help? Photo is upside down, sorry.

Looking for the internal gold piece that operates inside the door. The white handles appear fine. One of the latches is not operating to lock and unlock.Stephen

The complete insert cover for latch is 11 1/2 inch by 1/2 inch opening. The top door latch broke as seen in pic. I need the assembly minus the handle. I seen similar part Product Code: 82-238 on your store but the measurements are not the same, that one is only 9 inch. Can you help with this? Model ... (cont.)

Total length 11 5/8 inchLength of farthest screws 11.0 inchLength of inner screws 3 1/4See picture for above.Bottom hook seized, broke. Need to replace whole lock unitGlass patio doorThank you

Good afternoon, I am looking to replace my broken sliding door lock. I think I found the right one on your site. Just wanted make sure. Thank you.

Two Patent #'s on one side -- 6.264.252 and 5.820.170 Stamped on other side in rectangular box - JUL 13

My handle the inside working parts are broken it has a double claw closure and I can't find the part anywhere.