Viewing all customer Discussions for:

15-195 1-1/4" T-Lock Balance Shoe, Closed Cam

Looking for a 21D window balancer

I need 2 27A and 2 27B window balances. Enclosed are the pics.

Need balancer with stamp 20-5

What are the specifications for this part

it has 27B stamped vertically at the top of the balance

Hi, I have three windows that have loose string coming out the side and this piece was completely broken. I am unsure what replacement parts I need.

Please let me know what I need to make this repair

It looks like this is a T-lock shoe. The number stamped on the metal channel balance is 28B BSI TN. I think the balances are fine, but both of these things have broken.

The MI window is 17 years old, and when they sent me a new balancer, it had the round connection down at the bottom for the pin coming out of the window. As you can see by my pictures, I need something with a flat rectangular type pin.

My part has "28E" engraved on the outside of the channel. I believe this is the 765 but your description says the top is a screw in type clip. Mine has an actual clip that is installed into a hole in the window frame. I have several that I need to replace that have come detached from the window. ... (cont.)

Hopefully you can identify the window balance based on photos the home is about 30 yrs old and half the windows will not operate so I'm going to replace all balances. Stamp on channel 26C

I just want to give you all information that you need to correctly identify what I need. Here are photos requested which should better show information. Need 2 each S795 series and stamping is 28D which is for 23-28 pounds sash weight. Need hook end balance clip attachment 15-198. You mentioned t ... (cont.)

WANTED TO SEE IF YOU CARRY THE BALANCE STRIP OR THE PART THAT FITS ON THE BOTTOM THAT FAIL. IF YOU HAVE A BALANCER THAT FITS OR HAVE ONE THAT IS MORE ROBUST, PLEASE LET ME KNOW. THESE WINDOWS WERE INSTALLED IN 2008. NAMI NEFC 100/200 (SERIES BMDH) (MST 3856)

I need to replace the channel balances is two tilt-out windows. Windows are the same size and manufacturer, and were installed in new construction in 2004. I've viewed your videos and looked at the available balances. My balances appear to be plain channel, 30"; stamp 30B; standard bottom and two ... (cont.)

Hello, I am needing to replace the shoe in the photo; however, I am not able to determine the correct size. Warm Regards, Doug

26" Stamped #:26BThe little hook on the top goes into a hole at the top of the window and the block at the bottom works like a break when the window is engaged

05-747-28B maybe

The window will no longer stay up.

Hi, Need T-Lock Balance Shoe replacement part# for PlyGem 1500 series vinyl window. Thanks Steve

Need to match these up please