Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

Need a couple of replacements

I am looking for a part for a Truth operator. its the part that the window slides on. One picture is the right side that has the part and one picture is the left side that is missing the part. Thanks

Hi, Can you please identify what crank this is with the long arm? Thank you

Looking for sill mounted LH approx 9.5" arm, dimensions 4" L x 1.5" W x 5/8" H, similar to Swisco 39-366

I'm looking for these parts for the top and bottom of the window. Part numbers I can see are 33177b and 30744. Not sure what brand window is.

I need to replace an operator. It would be the opposite side of the one shown. I am not sure the length of arm I need. ThanksJoe

The short piece is 6 inches and the number on it is 30350 and is on both the bottom and top of window The long piece is angled as it goes into the crank area but the part that extends out is 11 inches The wide piece with the channel is attached to the bottom of the window and is 11 inches long. Part ... (cont.)

Hello, Looking to replace some stripped hardware for windows in a house we plan to sell in 1 year. As shown in the photo the numbers on the hardware are 40942-A.

Looking to replace multiple casement window operators. The track on the window is from below.

our L hand operator is C-1081-101 with long arm S-1081-102 and short arm S-1081-56our R hand operator is C-1081-201 with long arm S-1081-202 and short arm S-1081-56are these operators still available?

Hello, I have customer with Marvin windows possibly 20 to 30 years old and various styles.I need window cranks LH & RH with crank handles and covers.I need proper parts for these, do you carry them ?Ed

Good day, attached are photos of my operator that has broken. I believe it's an old Anderson from 1963 it has glazing on the outside panes of glass so it's original. The arm is about 9 1/2 inches in that realm.. I have four of the same units two are right and two are left out on the set of windows. ... (cont.)

Hello, looking to replace this operator. Need several. Many thanks.

I need one replacement casement window scissor hinge and handle. Let me know if you. Wed anything else if the pictures don't help. Thanks. Jim

I have 2 case windows with Truth 30706 mechanisms and no handles. All crank handles I have found are a female part that connects to a male connection crank handle. Is there a special adapter or crank handle for the Truth 30706 or is this part obsolete and unavailable?

I'm looking to replace a broken lower hinge on my 24" by 48" crank window. it's the bottom hinge on the left side on a double crank window. It looks like the parts you have are one piece crank arm and hinge ? Thanks, Mike

There are no ID numbers on hardware orher trade name" MILA"

Wright on crank and other hardware # 30744. Thanks for your help. Steve

need left and right 13-1/2" wright 7701 replacent handles arms and gear..

11 inch The bar is 11.25 inches long. The windows that I have have a channel at the bottom that a wheel rides in and they are rear mounted. Maybe a shorter arm might work? The height of the wheel is 5/16" tall and the groove that the wheel rides in is 9/16" wide. Yes I need 3 left and 3 right ... (cont.)