Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

Windows are likely mid-90's custom. Unknown window maker. The numbers on the metal arms look like R308 on one and 20810 (smaller numbers) on another small metal arm. Looks like the manufacturer could be Entry Guard Truth. Photos and best crack at measuring attached. Also, I would need a left an ... (cont.)

We tried to close the window yesterday and the gear was loose. When I opened the casing, the gear fell out

This piece detaches from the casement opperator everytime we try to close the window. Is there a way to get it to stay or do I need a replacement part?

As seen in photo "1 window corroded hinge ...", we need new 10" bottom hinges on four old Viking windows (we'll be moving the guilty sprinklers, but stainless steel replacements seem like a good idea). We also need an operator for a right-hand window (opposite opening of the one in the photo). The t ... (cont.)

Good morning Here are the parts I need. First two top and bottom view of same part. Last two are of the same part just different views. I will need both right and left hand operating window part numbers. thanks

Looking for replacement Weather Shield left handing operator, 13-1/2" arm, sill mount, handle has no screw to enable removal. 42 & LH stamped into rear of housing. Operator body is 5/8" thick. 3" & 1-5/8" center to center on mounting screws. Thank you!

I need a new crank mechanisum Pella Windows, all Wood, Casement Windows

Look for the replacement for this

looking from inside - the is a bay window left window that open out to the left. the spiral screw thing does not stay in when turn. it keeps coming out and the plastic cover will pop. if i push in and push pressure it will open but not close as i m not pushing in to turn it to close. i assume it ... (cont.)

Hi there, I am needing to replace a handful of window hardware for my new home. I've provided a picture of the window in our master bedroom. We need to replace the hardware, case, and handle for both the left and right side windows.

Only marking is "RH" on underside of mech. Cover over gearbox does not appear to be removable - one piece casting.I see the brand name "Caradco" on the knob. Distance from center of pivot to center of outer roller on arm is 13.5 inches. Thanks

Hello, I have a client and some of her large casement windows are not closing properly and we have diagnoesed it to the hardware. it seems as if the hinges at the top are pulling from the window and lettign it sag enough where the hinges at teh bottom hit the window frame at the bottom and wont let ... (cont.)

attached our pictures of the type of operator I have on my casement windows. Please advise. Thank you

I have a duplex with older crank out windows. Some need crank handles some need new arms I cant seem to find any info on Rimco brand. Any help would be greatly appreciated.I have removed the crank out assembly for the right side looking out of window.Its says LH unsure why but no numbers.If need mo ... (cont.)

I need the is part and the other part on the top of the window as well

I have casement windows in my house and one of them is missing a portion of the lower hinge assembly, including the 10 inch long metal plate that screws to the windowsill, the mechanism that connects the bottom corner of the window that is supposed to pivot to that bar, and the arm that attaches to ... (cont.)

Cranks open ok, closing window cranks arm out of socket

Need a new left handed and right handed operator. It about 9" long.

The hardware was installed in the '80s. The only identifying part I can find is intrigue guard truth.

Handle to open and close the window broke. Has the numbers 20810 and 30841L. Also says Entrygard and Truth. Not sure what the replacement would be. Could I get the correct number for a replacement part.