Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

I need to replace both the right and left window crank assemble. The plastic round piece slips out of the track. The track is 7" and the arm is around 9". Thank you for your assistance

The bottom hardware that connects to the window is rusting and has failed. The operator is a entry guard that is still in good working order. It looks like the 2-bar hinge set 10" (36-048) will work on the unit but I need to find the parts for what is connected to the window itself. Please see attac ... (cont.)

I have one wind that is missing the bar that allows the window to open and another window the bar is there but it easily drops out of the track. What do I need to fix both issues? The picture is of item #1 only. Thank you!!

I'm looking for the roller and the part the roller fits into.

Are these available 3 locks and 2 operators

Hello, Thanks so much for helping me identify these parts. I have Truth window parts in these windows. I need new casement operators. They seem to be single arms with the arms being roughly 8.5" long and 12" long. I put a tape measure on them in the images. They don't have to match perfect, the ... (cont.)

I took pictures of intact left window and the right window with bar missing. I need the 11 5/8 inch long bar

I am trying to find a replacement for this operator. The handle say Malta, but there are no real markings on it other than that. It is 9.5" from the pivot to the end. The nylon bushing that slides in the track is 9/16". The spacing between the two farthest mounting holes is 3". The flat part that is ... (cont.)

Good morning! I need to locate the parts to repair a window that was installed a few years ago that did not have the tracks installed on it for the operators. The daylight on each is 18" for the glass, the casements are around 22" each which give it around a 48" outside to outside of the window. ... (cont.)

Hello, We need help deciding on which parts to get to replace the the entire crank mechanism (hinge arms, track, operator) on our 1980's Hurd double casement windows (left and right). Could someone help with this? Double casement widow width each 17.5" Hurd windows House built in 1982-4 Thank yo ... (cont.)

Is there any way to adjust the operator? When you purchase a replacement. Is the handing designated from the inside or the outside of the window? Thank you

Is this enough for you to identify this operator? I had the end of the tape at the end of the arm.

I am trying to find the track that with a window crack made by truth 070207

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

If you see this part is under the bottom part of the window is the one I need thanks

Do you supply the operator in the attached photo if so I need 15 right and 15 left 9.5 inches? Regards, Kevin

I need a few LH and RH Caradco casement window operators. The length of the single arm is 14" and the roller is 7/8" diameter. Mine looks like your 39-013 and 39-014 but the arm is only 13.5" long. But that might work, what is the diameter of the end roller?

Was wondering if you could help me identify these arms for replacment for my Casement windows. Thanks in advance

I have several casement windows that need replacement operators. The attached picture is actually a previous customer of yours, but it is the same item that I need. My question concerns the replacement operator - does it include the part that attaches to the bottom of the window frame - I will call ... (cont.)

Hello, I am trying to find a replacement part for an older model of casement window. We order parts from a different distributer per their recommendations and they do not fit. I am hoping someone from your team can be of better assistance. The first picture is the original that is broken. Other pi ... (cont.)