Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

This seal is on the top of inner and bottom of outer. They join together when window is closed.

I need to replace several balances and bottom weather seals on my windows. I have included photos of the weather seal, balances (both damaged and undamaged), and the pivot shoe. I removed the sash and it weighs just at 19 lbs. I have not removed any parts for inspection, but cannot locate any identi ... (cont.)

Need help finding a foam seal replacement on a viwintech window. I believe it was held on by adhesive. Thanks for the help!

Hi Looking to replace old seal for bottom sash of Alside window Model 0201 Excalibur dbl hung

Simonton windows. Installed 2001. Cracked and worn mainly due to south facing windows.

I've got a bunch of 20 year old vinyl windows that are in good shape excep for the bubble seal at bottom Total height looks to be 1/2 inch Bubble looks to be 3/8 or possibly 1/4 inch Help me Obi Wan. Your my only hope

Looking for weatherstripping for Alliance windows.

I have no knowledge of the age or manufacturer of my vinyl replacement windows but am searching for replacement seals for the horizontal sash.

Looking to replace weather strips on vinyl windows. Windows are approx 20 years old. Unable to identify manufacturer.

Hi , need 40 ft Thanks

Windows installed about 2001. I see no names or manufacturer anywhere. Except on handle assembly it says "deal". Let me know what type of weather seal would be direct replacement. Happy to resend different pics or measurements if needed.Sean

HELP!What I ordered was 10 packs of 58-171 but the bulb seems to smaller as well as the T. I have only used one pack.Thank You,Jimmy

Looked through your site, didn't see anything I could use Any ideas? Thanks for your help.

looking to see if you have the vinyl insert with the rubber gasket for GRW. Quite old over 35 years old. If you do have them,I will email you the size and number of strips needed. It is not the felt stripping. I believe I have to loosen about 6-8 screws in the frame to slide this in. thanks den ... (cont.)

We can't find an exact match on your site.? The .270. 58-171 and the .187. 58-182 look similar, but where they fit into the top of the window, it looks like a different fit -- only one side sticks out ( on ours, both sides protrude) and the part that sticks out is different. Our piece matches the ... (cont.)

Attached are three pics of the window weatherstripping that I need to replace with measurements. Can you let me know the correct replacement that I need to order. Thanks.

for the bottom of lower window in double hung windows

1: I am converting from a Block and Tackle Rod Balance to a Channel Balance for all my windows, 19 to be exact. Does it matter which cam is chosen, open or closed, when replacing the entire balance? How do I know if the existing pivot bars are compatible with the replacement balances? Should I just ... (cont.)

Please see photo to help me identify a replacement for weather stripping on my windows. The picture is of existing weather stripping I am replacing.

Need the pile weatherstripping, the latch, and the bottom weatherstripping. Pictures attached