Discussions for S385-27 : SWISCO.com

Can I use a stronger stamp than what my sash weight needs?

What would be the result of selecting a balance rated for a heavier sash? For example, what if I am replacing a pair labeled 26 4, which I understand to mean sash weight from 19 to 26 and requires stamp 2640, but choose instead stamp 2650, rated for 26 to 30. Would the sash still raise? Would it be ... (cont.)

How to identify balance?

Stamped on side is 26 4 CALDWELL DM. Can you use this to pick my balance?

Series 380 or Series 385?

Hello, I am researching your products to find an appropriate spring balance for my single hung non tilt windows. The old (broken) part has a stamp on the metal channel that says "26C USB". The metal channel is 27" long and 9/16" wide. It looks exactly like both the 380 and 385 series available on ... (cont.)

How do I decide the best stamp?

I will need a S385-27 with 19-005 and 15-004 attached. I am just not sure about the proper stamp option. The weight of the stash is 29 lbs. I would like to order (4) balances (two windows). Thank you.

Find a correct type for my old balance

Hello, Please help me identify the correct type based on the attached photos. Thank you!

+4

Channel replacement

Looking for the correct channel replacement part 26-4

+2

26 4 Caldwell HM

Hi there! I need to replace these springs in 9 windows, so will need 18 springs.If you have these available, will you please quote me for 18 Bandon

+2

Balance, new spring?

HELP to identify. And replaceCODE on back: 26.6 HR CALDWELL

+2

Which is the replacement part I need?

I'm unable to determine which part to order from your pictures. 1/2" wide, 27" channel.

26 4 AN Caldwell

Need replacement balance. Stamp on existing part is 26 4 AN Caldwell

+1

Parts

Hello I'm needing this part for the window to my mobile home it won't stay up I will need two full sets

+7

Kapaka: Need to replace both left and right window balances

Item is non-tilt 1/2 inch wide 27 inch long Markings say "26 5 IW CMC 11" To me, it looks like S378 or S380 or S385, but I can't tell what the differences are between those?

+3

Channel Balance

Came off when opening the window. The length seems to be 27" (metal edge to metal edge) while the number printed on it says 26, not sure why they're different

+1

I need two of these

Have attached a photo of the part number, and both ends. Thanks!

+3

Window Sash Balance Channel

To Whom It May Concern: I'm a homeowner who's looking to replace some broken parts to my window. My window sash balance channel had ripped apart and now I need to replace the channel and some of the necessary parts. Marking on the channel: 26-5 AT5 CMC 1 The channel length is 27 inches I wi ... (cont.)

+6

Need replacement window balances

Manufacturer is Pacific windows. Windows are original to a house built in 2001/2002. Balance channel is 27" long and 1/2" (9/16") wide. I can't tell if the photos uploaded or not. In case not, the stamping on the balalnce channel is a "26" with some space and then a "4" and then a sideways "BSI" ... (cont.)

+1

26 4 cw.

shoe size is 1-1/16 (measured with caliper), it puts it between 380 and 385 models. i wonder which one should i order and if i there are any additional tools i may need to replace balance. just in case, balance was installed (i guess) 23 years ago

Non tilt window channel balance

Need help identifying which balances I can purchase to replace these. stamped 26 4 BW CMC 4 metal channel is 27" long thank you

+2

Window Channel Balance Replacements

Hi There !I am looking for Window Channel Balance peplacements for bedroom window that slides up and down. pls refer to attached photos and detailsChannel length is 27 inchesMarking Details : 26 4 GV CMC 2pls advise exact product details so that I can order these. thanks ! Amit

+2

26 4 HX CMC 11

Viewing all customer Discussions for: S385-27 27" Series 385 Channel Balance

Viewing all customer Discussions for:
S385-27 27" Series 385 Channel Balance