Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

2 1/2 inch pivot bar. It has one horn, and the holes appear to have been at 1" 5/8, and at 2". It's 5/32" thick. Do you have one that will work?

The pivot bars on a bunch of my Oran windows have corroded and broken around the screw hole so the windows no longer stay up when opened. I have checked all over the internet and have not been able to locate any replacement pivot bars in this style. Thanks.

Hello, I need a replacement for this balance, thank you.

Looking for a pivot bar, 2 1/2” long, body is 5/16” wide, need the hole to be 2 1/16” from the end.

I have 10 windows with an old balancer. Most are broken and need to be replaced. The windows are of varying sizes, but all appear to use the same type of balancer. Please advise what replacement parts I can buy to get these windows working again.

need to know what replacemen parts i need to order to replace the existing balancer

Tilt-in window looking for pivot bar and pivot shoe

Looking for replacement pivot stash

I need a pivot bar that works with the Series 795 balance. I've tried both the 26-021, and the 26-366. The 26-366 is closest but does not extend out enough to catch on both balances.

Hello. The metal bar that the window pivots on has rusted away. I was able to remove it and the one on the other side. I need to get replacement parts - either the bar and screw or the entire spring mechanism - so I can repair the window. Thanks!

Do you have this balance it's a m&w double hung window the balance measure 31"

Two damaged "Tilt Window Balance Spring Assembly's" I would like to purchase 4 suitable repacements. The existing balance assemblys had the part number 97H 26-4 GB4 CMC 3 . Also need about 4 of the Zink windows supports shown in the attached pictures. The weight of the window 17.85lb ... (cont.)

These windows were installed around 2016 the sash pin broke on Both side sides on another window. This is a photo for a reference. Do you know which one I need to order?

I will need 32" and 28" replacements. I am pretty sure I will need channel balances but not sure which type I will need.

Hello! I need help identifying some replacement parts for the windows in my home, specifically the pivot/balance shoes and tilt latches. These are for Pella vinyl double hung windows manufactured around 2007. The pivot/balance shoe has number 4610108 stamped on it along with PAT number 6,679,000. T ... (cont.)

Please help me find this pivot bar for an unbranded window

Stamped 26B 26" long, 9/16" wide, 1/2" depth shoe is amesbury side-locking t-lock @ 1.25" wide attaches with a metal hook clip what parts do you suggest? Thank you.

I am needing replacement parts for a window, can you help.

Need plain channel balance for a 2007 Jeld Wen single hung window. Descriptions below: Etched in glass pane: Jeld Wen 20070415-00027-5317MZJW 01-08 LOW-EALI-MZ ASTM E 774 Sticker on side of sash: Part 0743499Vent panel 29.5 x 35 9/167085V SHNF WHT cam lock DP R-50

Side balance for PULTE windows needed. Stamp reads 30B, BSI? Please see pictures. Can you identify and let me know what to order?? Thank you.