Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

16 inch, stamped numbers: 16C BSI RG(small stamp, difficult read) Pivot lock shoe was difficult to remove, slid up the channel but it did not have wider gap? I don't see a match here.Pivot bar is 2 1/2 inchesI need the window channels, the pivot lock shoes and the pivot bars. I also need suggestio ... (cont.)

Looking for full sash replacement

Window weight 22.4 lb Measurement is 33 in for this balance. I need 10 for that size to cover my front windows downstairs. What else is need to identify our part? I eventually need to replace for all the windows in my house. Thanks for your help

Hi Swisco Team I am struggling finding the following parts 3 parts for my window 1. 1 pivot bar with 1 3/4 inches dimensions (see picture below. Can I use one for different dimensions? If yes what would you recommend image5.jpeg 2. 2 spring coil like the 2 image below image6.jpeg 3. 2 spring coil ... (cont.)

Hi Folks, Can you help me identify the replacement parts needed for this type of window? Thanks. Larry

I looking for this item

Please help identify a replacement pivot bar

Attic windows with tilt capability. Only no. pat. 5737877. Will need 12. Top and bottom.

I have 8 windows that need balances. 3 of the 36"x32". 3 of the 32"x34". 2 of the 36" x 24." (These are the dimensions of the lower frame. See pics please.) They are double-hung tilt-in windows made in the late 1990s. I've attached pics of the mechanisms, parts and labels.

Hi there! Please help me identify the window balance and pivot bar. See the pictures. Thank you! -- Sergey

Hello I would appreciate a price and lead time of 6 pairs of pivot pins Thank you

Hello, I'm looking for the specific 3'' window clips and also the window balance which reads 31'' D on it. I'm worrying if you could help me identify on your website these specific items these are. Thank you.

I need to order several of these pins which slide in the vinyl window track. please let me know the correct part number. Thanks, Scott

Trying to identify this broken sash shoe support. On the side of part there is a number labeled. 23145

265 A Inserts into bottom rail

I have 291/2 to 29 1/4. Inch sizes And 15. 1-4"

hello, I have several broken balances. The 1/4" fiberglass rod is breaking through the plastic cap at the top of the balance. The windows are JD weld. They can not supply the replacements.

Window lock, L=5", 3 mount holes (1 non-linear), no markings/numbers Window pivot, L=2.5" W=1/4", hole spacing=13/16", no markings/numbers Window balance, L=22", markings: (02/3)UNIQUE 21-D-40 (Also need thin pvc?/plastic? inserts covering balance in channel) Thank you!

1997 vintage aluminum

Do you have this Part? Poy Gem Window?