Viewing all customer Discussions for:

26-030 PivotTrue Pivot Bar

This part fits inside the window and is attached with two Phillips head screws. this piece fits into the Product Code: 15-177 Coil Balance Shoe, Slate Blue

No markings on window to determine manufacture. Supposedly replaced a year prior to purchasing house in 2009. Believe was told sold/ installed by Window WorldI think I identified part as Pivot Bar, 3-1/16"Product Code: 26-226 by the specs, but would like professional opinion.Bars sheared. Superglued ... (cont.)

4 inch high and a 1/4 inch wide also the pin that goes into the window is 2 3/4 long x 1/4 wide

I am looking for tilt window pivot pins that fit your coil balance shoe #15-177.

Hi, i need several springs/coils and the metal rods that attach to the window that go into the spring/coil. I did not find any manufacturer name on the window....I'm hoping its a generic window and you have the parts. Thank you, appreciate any help. Tony

We could find no markings on the window, it will not stay up. Attached are photos, we have a couple more if needed. Trying to find replacement parts to repair one bedroom window. Sorry there is not a lot of information, appreciate you looking at this for us.

Only marking found is a number 5 in a circle

AllanPivot sash pin on the leftCoil balance springCover in center

I need some assistance with obtaining replacement pivot bars for several vinyl windows. Thanks Allan

The windows tilt for cleaning. I would like to order about 10 quantity. These connect to the spring bracket. As you can they break. Do you carry these?

At the bottom section of the window there's a pivot piece (the window can swing inside the home). This part is broken. It appears to be rod, that runs from on side of the frame to the other, but hard to tell exactly. The windows do not latch to the bottom of the frame and it causes the bottom of the ... (cont.)

I need two pivot bars as described below. Please let me know if you can help and what the cost will be including shipping. Thank you Sliding window pivot bar: Total length: 2 3/4 inches Center of bolt hole to center of bolt hole: 1 inch Width: 1/4 inch Depth: 3/16 inch Distance between points on ... (cont.)

Hi, I need to replace this part of the window and the clips. Where can I order from?

The existing bars are 2 3/4 inches long total. The one hole from the locking end to the center of the hole is one and 5/8 inch. I found some that you have that have two slotted holes however it appears the center of the first hole is an inch and 3/4 back from the locking end. If you could please hel ... (cont.)

The pivot pins are 2 1/2" long. One has a number 1 on it and the other has a number 8. The other part only needs the metal brake. Any advice?

Hello! I'll apologize right now for this very long email. I appreciate your time reading through it! I could really use your help identifying the pivot shoe and pivot bars in the attached photos. The shoe has the same width and height as Coil Balance Shoe, Slate Blue (Product Code: 15-177) but I am ... (cont.)

Please identify parts.

Hi, I'm trying to find the window stops and balancer for the grandview windows in my home. I need 4 window stop pins and one set of balancers.

Good afternoon: Hope all is well with you, your loved ones and your team mates. Please see the attached picture of some window parts I need to replace. I was unable to find any markings, names nor part numbers anywhere on the window or parts. The only thing that came close to resembling a mark was ... (cont.)

Hello, I've owned my home for several years and am finally getting around to fixing some poor-performing windows. I need some help determining what pieces to order and would appreciate your help. I have double hung windows at look like they were installed in 2005. The label says series "0401 double ... (cont.)