Viewing all customer Discussions for:

26-030 PivotTrue Pivot Bar

Hi. Need replacement for zinc window pivot bars but not sure which one to order. Thanks.

Broken Pivot bar: IMG_4962 Broken Pivot Lock Shoe Left Side pict: IMG_4953 Jammed pivot Lock Shoe Right Side pict: IMG_4957 Broken and Bent Pivot Bars ex: IMG_4961 I would replace the Pivot Lock Shoes on two windows: Pivot Lock Shoes quantity 4 Replace bent and broken Pivot Bars quantity 6 ... (cont.)

The post broke on both sides now I can't have my wife open and close my windows, I can't remember the name of the company that installed the windows but they are out of business. I'm very mechanically inclined so I will be repairing these if I can find the proper parts.

Hello, I am looking for replacement parts for a Soft Lite window installed about the late 1990s. I am looking for: Shoe (Photo) Foot (No photo) Lock (Photo) Thank you LH

I am looking for this pivot bar and it's shoe ,, It has stamp 6 or 9 I am not sureThe one I need is 2 & 13/16" long,and has one hole 1 & 7/16" from the end of the head

Hi. Trying to find a replacement pivot bar like this. Total length 2 3/4". From hole to point of bar 1-3/8". Thank you!

Tilt shoe and springs. No obvious markings. Shoe is 1 1/4" wide, 1 3/8" tall and 1/2" deep. Springs are ~ 1 1/8" wide and 1/2" deep. Windows have no markings either.

Here's a pic of the pivot boots in my windows.and a pic of the only sticker I can find on the window with any info. Just bought this house and need to replace one. The boot fits your pivot bar 26-030. Going to order the bars now tried looking up the business name based off what I can see on the st ... (cont.)

Here are some pictures of the item I am looking for. Not sure what they are called.There are some numbers on them:9749 1. I'm hoping you can find a replacement part for me. We got these windows from our local lumberyard and they think the window company went out of business.

Hello,We've seen pivot bars like your a few times in the past. You can view our recommendations to a previous customer here. Our best replacement options would be either our 26-030 or 26-226 pivot bar. Some customers have had no issues while others have had to make modifications to get one of these ... (cont.)

I'm not sure which Pivot Bar to use. The Bar for my window was broken on both sides at the weakest point, the screw hole. I didn't think to actually measure anything with a digital caliper until after I put what remained of the pivot bar back to at least have a window in place. I did take a picture ... (cont.)

I need 2 left balances and 2 right balances and 2 pivot bars. Each balancers have a 5 lb coil on the top and a 4 lb coil on the bottom.

Hi I am looking for the silver metal cylinder like sticking out of the side in the second picture and I believe it's called a balance assembly in the first picture. Thank you

I am in need of 25 of these pins but need to make sure I am ordering the correct one

Need assistance with identifying this part.

I think these are called coil balances they work but the cams are disintegrating and the sash pivots are breaking also when trying to remove the sash

I need four pivot bars as shown. OAL is 2 11/16".

I need the spring , there is a number 7 on it. The pivot bar , icant get the other one out I dont want to break it, Best measurants i can give you is 1-3/8 to first hole 2-7/8 to second hole and holes are 1-1/2 apart. The pivot bar carrier is 1-1/4 wide , 1/2 deep , 1-1/2 high.The pivot bar its 3 in ... (cont.)

Can u identify the brand? Thanks

Bar measures 2 5/16" long, .25"-5/16" wide and 3/16" thick. It has two holes - first at 1.125" from the insertion point into double hung pivot point and the second a slot that goes from 1 13/16" to 2". The end is beveled on the edges and top at 3/16"