Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

Looking for a replacement sweep

Just can't find this one.

Dear Swisco Staff:I need your assistance. I'm in need of a replacement door sweep for a Peachtree door. Attached are photos of the door which measures 32" wide. Most sincerely,Robert

I have this picture from Stanley after I sent them the numbers off the door, do you have this? Thanks, Gordy

This is for french door entry side

I'm needing a replacement part for rubber weatherstripping. The door a French door is by Cobb. 1 1/4" wide and 36" long. Pictures attached. I'd like two in order to replace for French doors.

I've been trying to locate a replacement door sweep. I'm attaching a couple pics, one of the old door sweeper where the distance between the vertical kerfs is 1 1/4" and the other pix of the bottom of the door shows the three 1/4" channels where there is ~ 1/2" between each side channel and the ce ... (cont.)

Hello, I am looking for a replacement sweep for three of my exterior entry (steel) doors on my home. They are made by a company called Premdor, who was acquired by a company called Masonite. The doors were put on in 2001. I am attaching three pictures with hopes it helps. These slide into groove ... (cont.)

I am confused because most people on here seem to have sweeps that push in. Unless I removed my sweep improperly. I just used pliers to slide straight out. I don't see any on your site that show sliding in instead of pushing in. How do I know if I can switch to another style. Thanks for your hel ... (cont.)

I am looking to replace the door sweep for a french exterior door. I am told the door may have been made by Caradco but I do not know that for sure. I have attached a photo and drawing with dimensions.The door was installed around 1993 or so. The overall thichness of the door is 1-15/16". the existi ... (cont.)

Looking for a replacement seal Door seal is 36 x 1 3/4

Hi, I have a 1 3/4" thick, 36" wide Stanley door. The previous door sweep was a snap in type. I did not think of measuring its dimensions before throwing it away, unfortunately.. The kerfs on my door, are 1" apart, not 7/8" apart as most of your door sweeps are designed for. Will your door sweeps w ... (cont.)

PPG Herculite patio door. 34 1/2" long Outside groove 1/2" deep, inside groove is 1/4" deep. They are 2 1/8" apart.

Pella Entry Door has this identifying number: F0100107842 03/05 NFRC5/8 kerf center to center along grooves

I want to replace the bottom weatherstripping on my Pella Architectural series French Doors. They were installed about 20 years ago (1997 or 1998). The doors swing in. Each door is about 78-1/2" H x 35-1/2" W x 1-7/8" D. Additionally, I want to know what vertical weatherstripping to use on t ... (cont.)

Bottom door sweep replacement woes... Help, =)

The door is 29 1/2 inches long on the side that needs replacement but I plan to replace both sides. The other side is 30 1/4. I believe there are 3 or 4 grooves that the sweep would slide into. Any help??Maybe the bottom is a plastic piece but i am nervous removing it because rain already leaks unde ... (cont.)

I hope you can help me locate the replacement part(s) for the attached diagram. The current installed sweep is in two separate pieces. I greatly appreciate your help. Thank you Dwight

I'm trying to identify what I need to buy in order to replace the damaged rubber door seal which has perished

Hi, the first picture is weather strip for 7 kolbe french doors, and the second picture is of a totally inadequate sweep for a 44" custom door. The 44" door is 1-3/4", the gap at bottom is about 1/2" Do you have something for these? Thank you