Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

I have 2 Stanley doors that are about 25 years old. I ordered (2) 58-008 seal kits. Our doors have a compression seal on all 3 sides, right left and top. The kit has 1 long compression seal and 1 long magnetic seal and 1 magnetic seal for the top. Do I have the correct kits for my doors? I also ... (cont.)

Dear Swisco support We have french doors with this weather strip. Can you please help us find a replacement part? Thank you!

your part number 58-189 looks like what I need but the figure above shows the depth of the sweeps to be 5/8". That is too long for my door as the distance from door bottom to the threshold is 1/2". I previously bought a door bottom that was the size you quote and the door did not close all the wa ... (cont.)

looking for bulb seal like this for man door no clue who the manufacture is

old one is worn out. It has an extrusion which goes inside recessed channel and locks on outer two edges. Fins hang down to create air barrier.

Good morning - my customer has the subject door in a 72"x 80" double door style. I need to replace all of the weather stripping including the bottom sweeps. Do you carry those parts?

I am looking for the insert for the The bottom channeled threshold of this exterior door please assist thank you let me know if you need anything else thank you. There was no part that I took out it's missing. Thank you

This is the only marking I could find on these doors. The sweep is now missing and I need a replacement. I know it is not a "typical" sweep and I am looking for some help in determining which sweep will work for the door.

Hi There I want to weather seal my front door, but there is a gap. What can I replace to seal the gap? Thanks! Malisa

two kerfs @ 3/4" apart; only finding wider kerf spacing (7/8" on up)

Need door sweep for Marvin Integrity 3x0 6x8 exterior door. See photo for specs

Hello,I need the slide in weather stripping for this Waudena steel entry door, model #S21-RLB. It's from 2010.Thanks,Paul

I can't get a good picture however the house was built in 2014. I know it's Penrod as the hinges have it's name. It has a brown sweep. I couldn't get a part number from their site. Thanks! Rob Handyman Services. I have purchased items from you in the past and found you to be very helpful! ... (cont.)

Looking for Door Sweep with Kerf. Measurements are 35 3/4 inch long, 1 3/4 inch wide and Kerf center measurements 1 5/8.

Can you identify this part? Also, how is it attached - screws, glue, staples, etc.?

The seal appears to have a bubble on the exterior side of the door. Not sure how it is in place as I did not want to take off the door from the frame. Could be with screws or just adhesive. Thanks for your help

Please let me know if you have any of these parts. I believe it it a Pella Designer series 8 x 5 ft French door. About 20 years old.

Trying to replace (2) Hoppe door seal / sweep. Door installed 2006. 3 bolt door with metal, wood, metal wood thickness. The sweep /seal fits up in the wood at bottom. Thanks, Tom.

I am seeking weather stripping that looks similar to the one in the images.

Please help me identify the parts for these doorsThank you Nancy