Viewing all customer Discussions for:

39-375 Encore Truth Folding Handle with Cover

Window crank handle pin sheared off from over turning it

Aloha, my window manufacturer company Ply Gem (West Pro Series 700 Windows) recommended your company for replacement parts for my awning windows. When I removed the operator mechanism, I was so glad to see that it was made in the USA. With some research I was led to Swisco. Please verify the right p ... (cont.)

I want to replace a Millard window operator. The number printed on the inside is 0.30800 11:51

I need to know what the replacement part is for these windows Milgard Studio (east face) Series 5320/5331/5720, PL #032-143 The longest arm Measures 10.5"

Dual arm operator will not crank in only out,

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

N/a

The long arm is 9 inches, the short straight arm is 4-1/2 inches. I see numbers: 31538a on the curved arm, 45179 on the crank assembly, 40754 on the short arm, a 5 digit number on the long arm which I cant quite make out, first digit is either a 3 or an 8, last digits are 1272. I need a left ha ... (cont.)

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P

Hi, I need this Truth window operator sourced. As well as the cover and handles. Operators for left hand and right hand. Thank you,

I am trying to identify the part number for the crank and arms for this Pella bathroom window. I used a tape measure to help with the sizing. Also looking for the part number for the crank cover and handle. Thanks!

Hi,I need to replace this mw window opener. Thanks. Dan

Good evening, some of the windows in my house do not open properly. They get stuck on the frame and some won't Close without me, pulling the window in. I don't know if it's the mechanism or what. But it looks like a product that you sell.

On the right "arm" the hinge point "rivet" is broken/missing. I need a whole new assembly. Which part is it I need to purchase/order?

I have a property under management that have Harvey casement windows installed and the operators are slowy rusting away as the location is oceanfront. The windows were installed in the 1980's or 1990's. The hardware is TRUTH components, and the only number I can find which is on the pivot arm is 3 ... (cont.)

The handle snapped off the drive shaft for opening mechanism on the right side window. The parts photographed are of the left side. So I will need the opposite of the left side drive mechanism.

Hello! The gears on my window operator are stripped out and need to be replaced. Can you help me ID which window operator I have? Also, is it possible to only replace just the window operator and reuse the existing covers?

I have a single Jeld-Wen Awning Window that I'm hoping to track down hadware for, hopefully in black. Can you help?

We have a problem with closing the window. When closing the handle scrolls.

See photo of Milgard casement window operator. The knob rivet is about to fail and I'd like to get replacement levers, both left and right side. Window and operator work fine. Can you help? Thanks, John McBirney