Viewing all customer Discussions for:

39-376 Encore Truth Folding Handle with Cover

I need some help identifying this item. I came across 39-253LB but I'm unsure if it's the correct item.

Hello, I would like to replace the pictured window parts: (1) Sill mounted dual arm operator, and (2) cover/handle. The dimensions appear to match the dimensions for Product Code: 39-253RB. 4 15/16" base and 4 7/8" cross-arm. The original window brand is Milgard.

Crank operators are rusted and inoperable.

Approximately 20" wide casement. Looking for both upper and lower arms.

Hello. There are no part numbers available. Let me know if you need more information

No part numbers available

Hi, missing the cap to the base as you can see on the photo with the white hardware. I also uploaded a picture of another window that has the cap on it.

5in arm. I can't find any markings on the crank itself. The part that goes against the window is around 5 1/4in.

My customer has 4 30"/60" casement windows, the hinge pieces on the bottom are rusted out. The hinge piece consists of a track the screws to the jamb 1 arm that clips to a bracket mounted on the window. The main track is about 13" the arm is about 10" and the bracket on the window is about 5" . All ... (cont.)

I need replace that casement is not working properly

Hi,We just bought a new house. Several of the windows have little as on the opener that pop out from the bottom of the window when I crank them closed. I think possibly the little black square that slides across the bottom of the window needs to be replaced. Do you have them (or other thoughts about ... (cont.)

Need to replace 07/21/00 made operator

I have a total of 4 broken cranks in my apartment, all of them are labeled with jeld-wen on the front, with S/truth hardware one the back. There are 3 with the crank/splines on the right and one with the crank/splines on the left. If you are able to ID these cranks I'd love to buy 4 of them from yo ... (cont.)

I'm with Goldfinch Brothers, a glazing company in Washington. We have been asked to replace hardware on up to 38 windows. Can you identify and quote each piece? We believe the casement operator to be an Amesbury Truth Maxim series. We've been asked for: lower hinges, operators, probably need the ma ... (cont.)

Hi, I would like to identify part for my windows and order it. TRUTH 40887B. Thanks.

See photos for all markings and hole patterns. Thanks!

Milgard logo on crank handle. Number 31858 stamped on lower arm (not one of the arms on the "dimensions" photo, but shown on "all parts" photo and closeup. Date and time shown on underside of unit -- 08/25/00 10:28. House was built in 1952; so window has been updated since the, but before our arriv ... (cont.)

I'm not sure which one is correct to order for replacement. Sticker on side reads: Series: Timeline Casement AAMA / NWWDA 101 / I.S 2-97 C-C50-36x72 C-C55-30x72

Hello, looking for a replacement crank for my casement window. Hurd is the brand. The crank has the number 032398 in black ink on the bottom. The longest black arm has 41012 stamped in the metal. The smaller black arm is stamped with 31876. The house was built in 2000.

i need one replacement window crank handle for a Jen Weld window installed about 4 years ago. It s a light gray and had the number 2119 R1 inside. The photos show a completed unit and the unit without the handle. I need just the handle.