Viewing all customer Discussions for:

26-394 Tilt Latch Assembly Pair

I need to replace 18 sets of this particular latch. They are 20 years old and they fall apart when moved. Your help would be great appreciated.Thank you,'Brian

Hello, I searched through your tilt latches and was unable to find the exact dimensions of my window tilt latches. I live in florida. These are older windows. These latches are on the top vcorners of the windows and are surface mounted. The dimension between the screw holes are 1 1/8". The overa ... (cont.)

Right and left window clasp used to lock window and to remove window

I am unable to locate window tilt latch replacements for the size on my windows. Attached are photos of the one that broke. I can't figure out where the 2 pieces connect. The measurements are: 2 1/2"L x 3/4"W with hole placement 1 1/8". Are these available? If not, any suggestions as to what mi ... (cont.)

It’s for a double hung window it’s what keeps the window sash in place

I have included the manufacturer info pic as well as the part I need to replace,

I don't have a photo of the post removed. Need to find a replacement. I've looked everywhere. Thanks.

Needing replacements latchesSurface Mounted Tilt Latches Measure 2 3/8" X 7/8", with screw set at 1 1/8"

My house has Flesher Windows Series 1000 single hung windows. I believe these are now Eastern Architectural Systems FWI 1000 windows. The tilt latches on them are becoming brittle and starting to break, and I would like to purchase some replacements. The overall width is about 2-3/8”, and the ... (cont.)

Plastic piece which serves as both window lock and window mechanism is 4 1/16" long it is 1 5/16" width, hard to tell a height it varies one side to the other. The piece that is the pivot point for the window I could only get an exterior pic of it as the window manufacturer crimped the edges like th ... (cont.)

I am looking for a window latch for my Kinco windows. Below is a pic of the plastic part that is broken. this is housed in a metal cover that holds it in place it has a pointed corner broken off on the right side.

Will need 2 see photo for parent number

I need window balance. 30 inches long. Also shoe 7/16 inch thick

Need 30 of these window latching locks

I have looked all over and I really dont think these are available anymore so if they are not is there an alternate that can be used. Thank you for any information you can give me.

Hi there. This is Steve. I have several windows with broken latch mechanisms. The mechanisms are secured with two screws as shown in the picture. The front is a spring latch that allows the window to tilt inward when unlatched. The metal bar in the rear is to lock the window in place when partially ... (cont.)

I am trying to help a friend repair broken parts on her windows. I can find nothing to identify the part. No manufacturer name or label. Maybe the pictures I attach can help.

Tilt sash top latch that runs in narrow groove between sash and channel balance. Old original shown in one photo. I bought replacements from you shown in 4 photos that didn't have the sash locks. But don't have the part number. Trying to find what fits, needs narrow point to fit in the sash and ... (cont.)

Trying to locate window tilt latches. 2 3/8 length 11/16 deep 1 1/8 inch to center of screws

Measurements: base length (2 3/8") X base width (13/16") X base height (3/8"). Mounting hole center to center (1 1/8"). Latch side end to first mounting hole center (5/8"). No locking tab on bottom. Thanks ! Don