Viewing all customer Discussions for:

S140-10 10 lb Series 140 Quick-Tilt, Single

It is a 30x34 inches window with a weight of 20 lbs. I need both sides single coil S140 assembly

Pivot shoe broke. I'm not sure how to remove it.

Looks like the ID NO is 10R I would like Ari replace both coils

1/2 inch width

This is a window ballancer and it it i written 10R.

Thank you

Not sure of makeke of window,but balance seems to be a series of springs. Both sides have broken..very heavy window, about 20 years old. Need replacements.

window size 35 7/8" x 24 7/8" - bottom sash won't stay up, broken balance. Sash weighs 16.4 lbs windows purchased on November 2019

I need 6 or 8 pairs

Looking to replace coil balances fully not just the coil

Hello, Just got and installed a set of s140.10 coils and realized need pivot pins as well. The 26.405 holes location seems right but does it fit the coil shoe? Thank you

Help me find this part please

Hi, I called early today. Please see attached part I’m seeking

Balance coil on upper is marked 17. Lower balance coil is marked 14. I also need 3 sets for duplicate windows which are upper balance 15 lower balance coil is 13. Your quick response is greatly appreciated.There are two more windows upper is marked 11and the lower sash is marked 10.Jim ... (cont.)

I hope you can help. These coil springs are in tandem, and they mount similar to a WRS series 37, with a single tan to the inside of each spring, but as the photo shows they are only 3/8" wide, with the shoe itself measing 1/2", so a 17/32" springer isn't going to work. Thanks for looking. Kirk in S ... (cont.)

No markings on the pivot shoe but on the coil balance cover there is a number 10 I assume refers to 10lbs.coil balance cover and pivot shoe are blocked from going up the jamb by an adjustment screw. How should I remove these parts so they can be correctly identified?

I'm looking for this coil balance for a tilt window it has the #10 stamped on it

My home has vinyl windows which were installed in March 2001. Unfortunately there are no window markings that show the manufacture of these windows. The window coil system on two of those windows have failed and I'm hoping to find a suitable replacement. Pictures 4 & 5 show an aluminum support ro ... (cont.)

Balance not holding window in position.

My metal coil snaped in two pieces and I need the the left and right coil. Sach weighs 17.8 lbs. The only marking I could find on the coil was a 0 and a K. Picture included. Thank you!