Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

9 1/2 in arm with offset crank for left and right arms 4 total screws into sill operator cover tapers from 4 in to 3 5/8

Handle turns but opener doesn't

I have wooden casement windows and need to replace some of the operators. I have attached pictures of what I have (they are either 9 1/2 inch or 9 3/4 inch arms I think). They are original to the house and are from the early 1970's. I have not been able to locate this exact match and would like your ... (cont.)

Order from our realtor, has 2 problems. [1] we received R/H (right hand) units when they should have been L/H. [2] the parts are not be compatible with our 38 year old windows anyway.The housing of the pieces you send us it 4 inches wide and we need 5 inched. We also need the crank in the middle o ... (cont.)

This crank arm somehow became detached in the wind. Do I need to replace or how do I fix? Thank you. (wright window)

I need to find the parts for our Winterguard white encasement windows bought in 1994. ~ Cathy

Good Afternoon Please find attached 3 pictures of a window crank assembly I am in need of. I require them for both left and right windows. Please let me know if you carry them, or know where I might be able to get them. Thank you

I'm looking for a left handle Ellipse Style Single Arm Operator, 9-1/2" with crank handle in a dark bronze finish and a EntryGard Dual Arm Operator right handle with crank handle which I believe is your Product Code: 39-031 in a beige color, please see photos. Thank you Ed

I am looking for replacement for Truth 45034LH... (3x) part 39028(left side crank) looks like exact replacement, is it available? I also looked at Ellipse 39-027E which has same measurements... Then saw Offset39-412, which also has correct measurements. Which is right for me? Wha ... (cont.)

What do you use to lubricate the bat-slides? Would use the same lubricant on the on the crank assembly gear? Thanks, Gary

Hi, This is the size and Product number of the crank system for Hurds Windows Product Number 07702-00 Wright Our windows are from 1988 Hurds. We need 4 Left and 2 Right sides Part. Can you please contact earliest at possible Attaching pictures with size measurement. Thanks Jodi J ... (cont.)

Hi... Looking for replacement hardware for Andersen 7073B (NOT 7073A) -- both the Left and Right crank-outs. Thank you.

Will the 39-520 track work with the 39-027E operator? Thanks

Do you have a replacement part for old Malta casement window crank set number 30350. The pins have rusted out on all of ours making the windows useless. I see on your site that this appears to be a common problem.

I have a Truth operator on Wenco casement in 1993 (home bought new 1993) The longest bar is 9 1/2" Any chance you could replace both left and right operators.

Looking to get replacements for the crank. Need 3 left handed and 1 right handed.

I looking for a Truth operator from a Crestline window. Operator is a Left hand 8" center to center piviot to roller 91/2" overall arm length. #on base 45275

Hi, I'm looking to replace several of these operating cranks for a casement window. The rest of the window hardware works OK. The part says Biltbest Part 233 D.C. It is from a window form the 70's or 80's I imagine. It is approximately 4 5/8" wide and 1 3/4 deep. This one is left handed with a gold ... (cont.)

window has broken plate making open/close non operational in suitable manner

I have seven broken Atrium window cranks: 4 right handled and 3 left handled. Please see the attached picture "AtriumWindowCrank.jpg". The number on the crank is 40425 and the operating arm is 9.4" long. Also, I have to replace the handle and/or mechanism for another Atrium Window shown in the atta ... (cont.)