Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Hiya, hope you can tell me what product is same as this: Wright 6077 stamped on both the left and right cranksets. Does anyone make this in stainless steel. Or bronze. Or enamelcoat? Thanks!

This is a double arm operator, with the longer arm about 9". The operator says Wright, and the crank handle says Hurd. The mount is rectangular, and the color is nickle

I have about 20 of these to replace, could you suggest a replacement. They are various lengths for different size window but if your able to confirm you have them then I will be in touch with all relevant sizes thank you

looking for replacement operator left side. Centerline to centerline of arm is 9 &3/8".On the arm is printed ULTRA. Also on arm above the ultra is an open circle that is open on top. Arm is 1/2" wide at end and 5/8" wide towards gear. Operator is flat mounted with a choice of 8 mounting holes. It ap ... (cont.)

The one you show is a right hand crank. Do you also have left hand? Is the color a very dark bronze?

For a Weathershiekd casement window. The straight arm operator is identified as manufactured by Wright and from elbow to end is 8 inches long. Can you offer any replacement. Thanks

I have several operators and handles that need to be replaced. The house was built in 1980. The operators are sill mounted, made by Truth. They are 9.5 inch and have no offset in the arm. There is the number 40056 on the unit. Thanks - Dave

I have 2 different lengths. One set of windows carries a 9 inch arm and the other set carries a 13 1/2 inch arm. I'll need some RH as well as LH Thanks.

I am a licensed General Contractor, wrapping up a remodel on a house we bought to flip, and have it for sale now. In doing final clean yesterday, I noticed the windows had some issues. The windows are BestBilt casement windows, and while most are vertical, some are horizontal. They all appear t ... (cont.)

I need a right and a left 39-028 crank in dark bronze. I only see 1. Do you have both

Hi, It seems your 39-027E is close to my broken left hand operator. I attached pictures of the broken one with dimensions shown at side. Please help me find the closest replacement to the TRUTH part #40055LH. The 1 inch depth recess (top view3) is more critical which the old trim sits on it. T ... (cont.)

They are Semco roll out window parts I am looking for. If you know of something comparable that I can install in my windows that would be a big help, I do not have to have the Semco brand. I am looking for the casements, the pull locks, and the strip on the window, I would like to replace all of the ... (cont.)

I have a casement operator with an 11" arm from the center of the wheel at the end, to the center of the gear. Do you have anything with that dimension?

Caradco is exactly what I need however I need it to be 11". Do you carry an 11 " Caradco window crank?

the operator I need is from a roughly 20 year old Wenco casement window. From the inside of the house , it is the one to open the right window. I need two of these and one which operates the left side window looking from inside the house.

The window-crank assembly does not have any markings on it. It was made by Malta. Can you replace it, or do you know who might be able to? Thank you.

I need to replace both the right and left cranks/arms of a bay window of a house I purchased. Not sure of window brand. Arm of crank has rimco stamped on it. Please help Jason

need two different replacement arms and cranks. Please let me know the part numbers so I can order the correct parts.

Hello - I need to get replacement parts for Anderson 7073b Left and Right (four left and four right) window cranks. Please advise.

I am looking for a replacement crank for a casement window, The house was built in 1962. The length is 12 in and the height of the assembly is 5/8 of an inch. Internal gear is stripped. Regards