Viewing all customer Discussions for:

39-387 Split-Arm Operator, Wright

We need the following: The piece that goes in the hole that the crank handle attaches two. 1 plate that goes on the window. 4 cranks

Operator - 4" wide, # marked on body 7708 Wright Arm 4" with # 07900 Slide rail (not in picture 8 15/16" long

Just looking to get a replacement. I ordered a few others that I thought were the correct ones but they were not. just looking for some help with finding the correct one. Thanks

I've got a casement window with Wright Delmar operators. The handle shaft has snapped off inside the control, so I need to find a replacement. Please see the attached photos. The control is 4" long. Can you suggest the correct replacement part? Also, since the Right side control broke, should I ... (cont.)

Something is stripped inside closer assembly . Just spins around and won't open or close crank out widows,

Hello, I have a Hurd Window crank that is completely snapped off on one side. I would like to replace both as I want a cohesive look for both windows. So I need to know what would be able to replace these with - I would be happy to send measurements as well for a more accurate answer. Thank you! ... (cont.)

Can you help me find this part

Trying to replace an old casement handle that has stripped grooves inside. I measured and thought that 3/8" bore was correct and I purchased item 39-104. Unfortunately the bore seems slightly large for the male portion on the window. I am enclosing pictures of the old handle. Unfortunately I can't f ... (cont.)

I need 1 left crank and 2 right cranks photo is of the left crank ! I

all opperators have 07900 stamped but can't seem to find that part please help. thank you!

I was looking for a replacement for this window operator...tried a few different ones but can't find one that fits

Hi ? hoping to get some help to identify the parts I need. I will need three parts. I really appreciate it. Thanks

The uploaded picture shows the Hurd casement window hinge with the marking 6D302. The window was installed in 2002 and I need to replace the hinge and the track. Please tell me which of your product is a direct replacement. Thank you.

Looking for window crank wright 07900

7701 is stamped on the bottom of the gold housing. "Wright' is stamped on the top and bottom of the 1'st black arm. Apppears to match your 39-387 with measurements.

I was wondering if you could help me identify this casement window operator it's a Delmar window with the US and Canadian patent number on it

Crank still works, but 3/4 to closed, it hangs up. I can then pullk the window in a biut, and the crank with then continue to full closure. Set scre on crank handle is tight. Crank "axle" seems to be loose. I think that several teeth on the mean crank gear are broken.Oliver

These are for 1988 vintage Hurd wood/clad casement windows Do you have this mechanism? don't really need any crank handles or covers unless the originals won't fit the new mechanism. Please advise

Hell can you help me finding this parts for my window the top, bottom,handle for the window and the lock. I have 10 windows and not closing others are broken thanks for the help I appreciate a lot.

This is off a bedroom window. Bronze Ellipse Dyad Left Hand Casement Window Operator with Crank