Viewing all customer Discussions for:

26-121 RH Top Tilt Latch, 2-1/8"

Need 2 of these surface mounted latches

Have found a part that does not work since the tooth did not extend out far enough. Need to have it extend at least 1/2 inch.

I need 6 lefts, and 6 rights. The hole space is 2 1/8". Overall length is 3 1/16th. Do you have them ?

I bought the the sash lock in the picture (26-121) attached but it is just slightly different from the original. Do you have one that matches?

Hi, wow cool you can send the picture in... i have this part witch from screw hole to screrw hole is 2 and a 1/4 inches

Hello, I am looking for 10 of these window parts (for 5 windows). Number on the back is 2634. I've attached photos. Hope you can help! Thanks, Melanie

Can you please tell me the replacement part I need to order for this window latch? I need a left and a right one. Thank you,

need theses parts

Looking for replacement latches for those shown in the photos. I think they come from Ducana windows from about 15-20 years ago.

Hi there, I

I have pictured thermal gard windows. I need several replacement parts of all three plastic sash lifts plastic sash keepers metal locks any assistance would be appreciated!

Hello, I need 2 of these latches, the only thing that the window says is Superseal, 1990. Dave H

Hi, I cannot seem to match my size to a part number. Hoping you can help. Ken

only marking is on Tilt Latch: Poly-Tex, Pittsburgh, Penn. tilt Latch is 3 1/16" x 1 5/16" Two screw holes of different sizes and offset. Photograph shows top and underside. Pivot bar is 3" x 1/4" and has two slots for attachment screws. I appreciate your help in identifying and acquiring th ... (cont.)

See photos. Need the left and right. Part is about 3" long, screw holes on 2" center. The finger hole is oval. The screws are offset away from the edge of the window.

Hi, I spoke with A representative yesterday at your store and I am not sure what type of part I need to fix my window. The make of the window is Patriot. I need a coil balance for it. The attached pictures should give you an indication of what type of coil balance I need. Can you please take a lo ... (cont.)

Our client is looking for the tilt latches for the vinyl single hung window. They told us that it was Milgard window's single hung windows. We showed all the photos and information to Milgard window's service department, but they are sure that their single hung window had never had the tilt latches ... (cont.)

Buying a home that has Daco on the the window locks. The latches are on both sides of the window that allows you open same.

I am looking for replacement tilt window latches for Castle double hung vinyl windows. Visually and dimensionally, they most resemble your 26-228/229 parts. However, mine are 1-11/32" wide, 2-3/32" hole center, and have a 3/16" diameter boss that sticks out the bottom about .100. Hole diameter is 3/ ... (cont.)

Hi, I had purchased these latches from your shop several years back and now need more. Numbers on the back: 11147 L 3 PAT,#4,901475 I would need 15 of each right- and left-handed latches (a total of 15 pairs; 30 count total). It looks very much like part number: 26-228 (R-handed tilt latch ... (cont.)