Viewing all customer Discussions for:

26-402 Side Mount Pivot Bar

I need to replace broken balances, keepers, and cam pivots on several windows. 1- The broken latch keeper is 2 1/8" wide and 1 1/4" tall (photo of unbroken one). The screws are 1.5" apart. 2- The broken cam pivots are mounted on the side of the sash with two screws 1/2" apart. The left ... (cont.)

Looking to replace these. Going to order 26-402 to see if they will fit. Any other ideas? Thank you -

I have a problem with my Pivot Pin on the lower bottom sash I don't have a manufacturer but I do have the size and some pic. please let me know what you think.

This piece is installed in a KK window. Double hung windows that pivot in to remove. There is a track in the window for the hanging track, but no deeper track for this piece. It is flat-backed. I measured it at 3/8" wide, 1.5" long, and 9/16" deep, but that may not be perfectly accurate. It appears ... (cont.)

Some ropes broken. Shoe is stuck at bottom does not slide up and down track Are there different sizes or are parts standard?

Bottom sash latch for hurd wooden window

We have these style of sash pins in our historic district, we believe they are eagle window parts. Do you guys carry anything like this? The spacing between the holes on ours is roughly 5/8

We are in need of a pivot shoe, pivot bar and inverted link (not in picture because we don't have!)for a tilt balance. The balance has 29C stamped on it but we do not need the balance.

Do you still have 26-401 Tilt-in Sash Pivots (or the equivalent)? Thanks, John

Superior alumiun clad series Double hung tilt When window is opened it falls out side piece needs replacement

need ten of these pivot bars. thanks-ej

The metal track is stamped BSI 24C It's a vertical sliding window that tilts Can't determine brand

I am looking for A replacement of eight complete Window balances (08/05) Unique balance and side T pivot with three holes. please let me know the cost. I am in Canada. Patrick

Can you give me a part # for the item in the photos attached On the bottom of the window Intregrity 1 G CC R C B A 1 C M A C -C I C-6 2 - 02

Hi, I was able to find the block and tackle link as your part #15-224 Would you carry the tilt pin that corresponds with that series of Hurd double hungs (see attached picture) Thanks!

need to replace 2 tilt studs attached at each corner of the bottom end of a tilt-in window. It is L-shaped with the following dimension: 1 and 5/16"" long (1 and 1/8" long inside to the bottom L), 5/8" long on bottom L and 1/2" long upper bottom L, 1/" thick The window has a logo M at the ... (cont.)

I'm looking for the Tilt Window Spiral Balance Pivot Lock Shoe replacement for my window balance. I just ordered the part: (10) 26-402 : side mount pivot bar which goes into the shoe. Can I order just the white plastic part without the whole balance? Please see attached pictures. Thank you! ... (cont.)

The latch that goes into the pivot shove snapped on one side. I need assistance in identifying the part in order to locate a replacement. Any help would be greatly appreciated. Cody

I have a jeld-wen window, which is a double hung sash window. the sash pivot bar is broken. the window is vinyl and wood (the screws go into wood, but the body of the window is vinyl).

can you identify a part number for me