Viewing all customer Discussions for:

26-402 Side Mount Pivot Bar

Hi, need small metal bracket that holds the window in the frame to allow window to be tilted inward for cleaning. The window is from Okna. I have replaced several myself, but ran out of the parts ...

I have some tilt double hung windows that have issues with the balance. The side mount pivot bar snapped between at the screw hole and broke the shoe. They are 25 inch balances with the hook at the top vs the screw in attach point. I want to replace 4 balances on two different 25# windows. The 2 ... (cont.)

I am looking for the sash lock and the sash pivot for the double hung. And the operator and cover on the casement window. the casement operator has the number 31538 stamped on the split arm and EntryGard truth on the straight arm.

Need to replace metal holder receivers on sashes

I have old Jeld-wen windows I think the model # is DH0087? I need 2 sash pins as in the photo - intact in the window in back, broken off the window in front. does Swisco sell them? Or any other suggestions? Tx ,

Need a replacement for this pivot pin. I don't know the brand of this window. House was built 2006. The pivot shoe is pulled by a line. Thanks for any help you can provide!

Searching for as many of these pivot bars as I can get (up to 3 dozen). Length of bar is 1 15/16" Width is 15/32" Height of bar excluding pivot extension: 1/4" Ht. of bar excluding pivot extension & 1/16" centering edge on back: 3/16" Overall height of bar incl. pivot extension & centering edge on ... (cont.)

This part is the piece on the edge of the sash of the Loewen double hung window. It fits into a cam that turns to allow the dash to tilt, as well as be lifted out of the frame. It seems that they must be easy to bend because of our 7 double hung windows, most of them appear to be bent at least slig ... (cont.)

I have Trim Line replacement double hung windows with broken sash pivot pins do you have replacements ? About 15 years old Thanks Mike

Hi, we are looking for this piece for the tilt double hung Bonneville window.

these brackets screw on the bottom of the sash and connects to the window stays, when the sash needs cleaning these brackets pivot so the window can be pulled forward

Hi guys, looking for this piece. I have the right one I need a replacement for the left one. Can anyone help me out?

Thanks for posting. See our 26-402. Compare the listed dimensions with your old pivot bar, and let us know if you think this could work for you.

need a replacement

balancers are NUX 33B Do you have them in white? I need 8 balancers and 8 sash pins/feet that goes into the shoe, they are approximately 1 1/4 long and 8 shoes for the balancers Thank you

I have a single hung window with a broken cam pivot. Unknown manufacturer.

Looking for a side mount pivot for a Kolbe double hung window

This is from a commercial apartment building, approximately 11 years old. Vinyl windows, but can't find a brand name. Right and left sides appear to be the same. Any idea or else an alternate part number?

Hi, I'm looking for the piece that allows the bottom panel of a guillotine window to slide up and down in its track, as well as pivot opened. Nothing on the window identifies the brand, and l"m at a bit of a loss... the piece is approximately 1.25" long, and 0.5" wide. Thanks for your help! ... (cont.)

Just bought cabin these parts are bent in the tilt out window. I do not know the parts but want to replace. Can you help me Id them? Thank you , Ralph F