Viewing all customer Discussions for:

26-403 Die-Cast Pivot Bar

Need for pivot Pen, Spyro tool Sparrow tool, Pivot pin,

25099Rocco

I looking for this part it holds sash on place this is 100 sh/dw 716/717 single hung sash made 2003year

Photo 1 is the bottom mechanism attached to an aluminum square bar imprinted with 26B , BSI VL. The bar measures 1/2 in by 1/2 inch.The bottom plastic mechanism measures 1 1/2 inches wide x 2 inches long x 1/2 inches deep. The second photo is the top of the aluminum 26 inch bar showing that it has ... (cont.)

I need 10 of these if you can find them

Please help me find this with screw if possible thank you.

The 2 the left seem the same( except taken apart from the housing), I need qty of 4. 26-425 looks pretty close. I also need 3 of the far right, could be part of 26-426, but I was unable to get the housing out. the cast pivot cane out with removing 1 screw. any help would be appreciated. I know they ... (cont.)

Hey, give our 26-403 a look! Let us know if the dimensions differ from your original pivot bar at all.

tilt pin for a Ellison series 500 vinyl window.overall length is 3' with a 5/8" tang, need at least two picies.

Bottom peg for windows hold open

Looking for a pivot bar. It's 2 3/4 in length w 1/2 sticking out. The screw hole is 2 1/4. Thanks

I have Atrium windows. In the picture, the shoe on the right labeled "B" was the original part in the window. The shoe labeled "A" on the left is what the local supplier got for me from Atrium. Evidently, that is what Atrium currently uses now and my windows were built in 2005. The issue with that i ... (cont.)

My block and tackle balance is 28 inches long and stamped 28B but the top end has a 1/4" wide hook attached to the string. The hook engages a 9/32" hole near the top of the window channel. >> Do you have a model with a hook or do I untie my hook and use it? My "pivot bar" also looks diff ... (cont.)

Hello. Do you have a shoe to fit this balance? Thank you Roy

Pivot is stamped with the number: 25099

I'm trying to identify this pivot post, so that I might order several replacements from you. I'm already a satisfied and repeat customer. Thanks! Mark

Hello, I am working with a customer who needs pivot bars. They are for an 8300 Atrium window from 2001! Can you help?

Thank you for helping me find this tilt pin

We live in a loft in a hundred year old textile mill that was renovated a decade ago. Attached is a photo of one of the four large windows in our unit. In the fall and spring, we like to open the bottom windows for fresh air circulation. All other sections are stationary. The windows are double p ... (cont.)

I need to replace some Pivot Shoes (see picture)on vinyl windows manufactured by Atrium in 2003. I will also be replacing Pivot Pins (see picture) which I have identified in the Swisco catalog. The balance the Pivot Shoe will attach to is shown in one of the pictures as well as the opening in the ... (cont.)