Viewing all customer Discussions for:

80-042 Vinyl Patio Door Draft Plug, Left

Our door has no manufacturer info. It is a generic sliding glass vinyl patio door, 60" wide, with one door stationary and the other sliding, left hand slides when viewed from outside the home. We need help with a couple of parts. (1) At the top end face edge of the stationary door where it is besi ... (cont.)

Trying to locate a replacement for one of these cleats which anchor the stationary panel on a sliding glass door. No identification on the door at all. These are plastic, but metal would be even better.

these items support the stationary door bottom and top. They are plastic as they are located in a waterfront building and can easily rust. They measure 1.5 x 1.5 width and height. Any alternative would be considered

I am not sure if it's actually a weep hole or a shipping situation but our sliding glass doors have small round holes on the interior side of the bottom frames in our vinyl doors. I just need the plugs for these.

My main concern is how to reduce the draft coming from the track. More concerning is the draft coming through the small cutout area to the left of the adjustment holes. Both of those areas on the top and bottom of the door are letting in more air than both tracks. I have included a picture of a smal ... (cont.)

Looking for this part for our sliding glass door

Hi , what is this lower fixed patio door bracket called ,the plastic cover that was over it deteriorated and I need to replace it . Do you sell it ?

i need these left side parts...thanks

While retrieving crayons from the sliding glass door at my Florida home (built circa 2005), I noticed a rather large air infiltration point at the top and bottom of the sliding glass door when closed. Spent the better part of today online looking for a solution. No idea who the manufacturer is nor i ... (cont.)

The part that secures the stationary panel of the patio glass door is bent and does not hold the stationary door completely flushed with the framework and causes a gap between door and framework that you can see through. I need the part for the right side panel if you are outside looking at the door ... (cont.)

I have a number of sliders all of which are missing "insulation plugs" at the middle of the upper track. There are no identifying markings anywhere on the doors/glass. The installs probably date from 2003. To help ID the parts, I posted three pics: a view of the outside of the door, a pic of the s ... (cont.)

Hi. I purchased home and noticed there is a large gap located above where the stationary door and sliding door meet to form a seal. There is no manufacturing name so I do not know the company who made this door. Do you know of any piece I could use to seal this gap up? Thank you so much! Will ... (cont.)

Hello Is there a plug that can me inserted on the Top and bottom of a JeldWen sliding glass aluminum door to close the gap? We are loosing heated air and rooms feeling colder then other parts of the house. See picture for detail. Thank you

Locking bar that the door latches to on the jam. Security clips indicated by 2 holes on the door that secure the stationary door to the jam.

I'm looking for a weather strip plug but for a 1-1/2" door