Viewing all customer Discussions for:

26-405 Rounded End Pivot Bar, 2-7/8"

I ordered some 140 model balancers that looked almost identical to these when I installed them I noticed they were round on the inside and didn't have that keyway type feature so they don't actually turn the locks, do you guys sell the little shaft in my sash that I can replace to match your 140 mod ... (cont.)

The intact coil assembly has 7R stamped on the case. The broken assembly does not have any marks. The bottom metal pins have the number 4 on them. I want to replace both coils and both broken metal pins

I have a double hung window (I do not know the brand) where the lower half has broken coils or springs. It is the part that helps lift the window. From what I have found searching, it is called a constant force balance. I was able to remove the window, and I can get to the broken part (and I thin ... (cont.)

I need these 4 parts and I'm not sure if they include the metal part that you see broken in one of the photos. The one that screws at the bottom of te window. Need 2 of those

Hi, all I know is that it has 2 coils and there's letters A-F. The top one has D in the upper right and the bottom has H in the upper right. Let me know if I need to completely unscrew and remove it. Thanks!

I need to replace the spring balancers on one of my windows. The following pictures show the broken coil balancer parts. Spring stamped with a 6. The last picture shows the balancer for the other sash that was replace previously. Window dimensions 34.5 X 76. Sash 29 x 27-375. Sash weight 20 pounds. ... (cont.)

Window

Part is springloaded and keeps window from slamming shut

Hello, I need help identifying which pivot bar, coil balance, and shoe sash to order for our Anlin Catalina series windows. They are double hung windows that won't stay up anymore. Thanks!

I need to know what part number this is for this window

EL7 is engraved on the end of the coil

Is this a picture of a coil spring window balance? Can I order a replacement? Or two? or 4? This one comes comes from the left side (facing the outdoors) bottom pane of a double hung, vinyl, inward tilting window. I do not know the manufacturer or the age of the window. Are they hard to install? ... (cont.)

BiU

Slidin Window Metal Pin which goes inside 8 lb Series 140 Quick-Tilt, Single

Looking for 2 I put a picture up with ruler showing the size

2.25" long, nose hole is threaded, has an offset

I need to identify a replacement part for this pivot bar.

Coil balance was 4 1/8 long by 1/2 to 5/8 thick

Hi There, I need complete set coil balance (left and right) for my window. do you mind which parts i need? appreciated

The one shown is not broken... need to find part #