Viewing all customer Discussions for:

39-107FK Truth Folding Handle And Cover Kit

I found the part # 30841L on the arm, and 40471 on the base piece by the gears.. I believe it is a clay color, however I am not finding the operator cover in the clay color. I need the crank,assembly,and operator cover. One last question- the crank is stripped for sure. Do I need to replace the arm ... (cont.)

Hi can you please tell me if part 39-107K and 38-209 Handle will fit a Norco Window Model Jel-N564 Thank You

I have two windows (images 5201 and 5204) where the drive pinion has come loose. Is that something I can fix or do I need all new crank assemblies. Both cranks have 20544 stamped on them, but one window only uses the long arm, where the other uses both arms. The long arm appear to be 9" long.I ha ... (cont.)

Searched for replacement of discontinued mMarvin handle / cover. Found a perfect replacement 39-107FK. See pics Thank you

I wish to replace a truth crank 45001 with a foldable crank. Can the crank and cover be replaced without having to pull the wood?

Hi folks, The operator shaft has snapped off the base. I suppose I'll need to replace the whole operator. Please see picture. Looks like a Truth Entryguard 31538. There's an "L" on the arm. Please help identify replacement part.

I purchased my Marvin windows in April 2005 and need replacement crank handles. Some are white. Others are different colors but I'm not exactly sure what they called it (see picture for one). Maybe Taupe and satin chrome? On my window specs it says "TP FOLDING HANDLE" and "SC FOLDING HANDLE" and I t ... (cont.)

Will this folding style handle fit my Kolbe crank out casement windows? Please see image below of current setup. Thank you!

Arm and crank of the window is broken and I need a replacement part that suits this window.

I am looking for a SEMCO casement window operator with the number 31538, it has a "Rivet to Rivet" length of 8 1/4" for a 17" wide window.

I recently moved into a new home that has a number of case windows with Caradco hardware. Four of the windows are not operating properly. I am able to engage the crank handle to open the windows, however when I attempt to close the window the handle turns out of the window crank mechanism altogethe ... (cont.)

I am looking for this part. Your suggested replacement part is 39-031, but that part has a nylon wheel and mine has a metal disk. I believe the nylon wheel on your part, will not fit my track. On the back,on my the long arm, the #40753 EntryGard Truth is stamped. On the back of the shorter arm th ... (cont.)

Our crank just fell out! Please help and recommend what we should do. We want to use this window. Thank you

our L hand operator is C-1081-101 with long arm S-1081-102 and short arm S-1081-56our R hand operator is C-1081-201 with long arm S-1081-202 and short arm S-1081-56are these operators still available?

Please see my attached picture and advise if these can be ordered. The 11 3/8" track the operator arm attaches to, and the 2 7/8" bracket (left side of photo)

I have 6 windows that that have these cranks they will no longer crank out or in. Please identify part so I can replace the window cranks when I use the crank it just spins.

Hi- I have several crank windows in my home and the handles need replacing. I have determined (with your assistance) that the model number that is the correct for replacement purposes is Part No. 39-205. As I was about to place my order for three of these crank handle replacements, I noticed that ... (cont.)

Needing a replacement crank assembly for Crestline window. Short arm had numbers 20810 stamped and is 4 3/8" long. Long arm is 9 1/2" long with numbers 40754 stamped. Entry Guard TRUTH is also stamped on the long arm. Locking latches are on the righthand side of the window (right hand side standing ... (cont.)

I have 20 Marvin casement windows, circa 1999. They work beautifully but the crank handles stick out and get in the way of blinds. Would your truth folding handle work for my windows? And is the a bulk price? The casing is 5.5 x 1.5" at its largest dimensions. Let me know if you need other informati ... (cont.)

We are searching for a Truth Entryguard Operator and are having trouble locating one with an arm that is roughly 9" when fully extended.