Viewing all customer Discussions for:

39-107FK Truth Folding Handle And Cover Kit

I would like to replace a standard window crank with a folding one to reduce the profile so that my new blinds do not get ruined. I have attached pictures of what I have. Is this the correct product to use to replace the existing? https://www.swisco.com/Truth-Kit/pd/Replacement-Window-Operator-Ac ... (cont.)

Can this handle replace existing handle on 39-031 and 39-032 dual arm operators? Bob

I've read other posts that when the worm gear comes out you can't replace it. That's what happened. so I would have to install a new operator. Is there one available that would work on this old window? The arm that extends out is approximately 10" long. Let me know if a better photo is needed. ... (cont.)

I have a sixth photo that has "truth 30744" stamp on arm too. I need a left and a right for both windows.

Looking for covers in white and foldable cranks need left and right. if there are new type of levers that fold down I would be interested if they fit.Thank you Ron

Has stamps as seen In attached pics Truth entry guard one looks like it's 30842R for right side? L30841 for left? Also had the numbers 20810 stamped on it. Need five sets of left and right replacements please advise.

Looking for a replacement casement mechanism for this Kolbe & Kolbe window. Hinged on the left side looking from the inside, open from right to left. Thank you! Randy

Hi,Do you have a dual arm operator, cover and splined folding handle like those shown in my photo's?Thank you,Tom

The name on the handle is "SEALRITE" The dimensions as best I can tell are 4&3/4" on the e3xterior arm and 5" on the inside crank. Numbers include 20755 on the upper arm and 31229 on the lower arm. Please not these pictures are for a window that opens to the left but the replacement I need is for a ... (cont.)

Hi Found your site by doing an internet search.. Do you have the operator handle and cover? Danny

I purchased part number 39-032 and 39-031 from you on 5/26/2022. I now need to purchase the 2 hand cranks associated with the dual arm operators that I purchased.The only numbers I see on the hand crank are US PAT des 361490ThanksFred

On the body of the unit: 40471, 25, 91. On the longer primary arm: 30470 LH. On the shorter secondary arm: L30841, 20810.

trying to locate new crank gear as a few of ours are stripped. The crank shroud is marked "Truth" and the only number is inside the handle "5054". Any help you can provide in identifying a compatible replacement is appreciated.

Hello. As you can see in the photos it is a Truth EntryGard. To my novice eyes it has three arms, a long one which is attached to the center of the window sash and two more which are attached to the top and bottom of a piece at the bottom of the sash. It is labeled with an "R" (I am guessing it sta ... (cont.)

The housing on the window operator crank cracks after many years of useage, so the worm gear no longer stays engaged when torque is applied. I need 6 of these crank mechanisms. Do I need to buy the entire window operator assembly, or can I just buy the crank mechanism? Whatever I need to buy, I need ... (cont.)

Hello,For the missing window crank, do you have a suggestion of what I could use to replace this? I would like to have it fold down. For some reason, this particular window has two different parts for cranks. On the left side, the 39-107FK Swiss product works. However, on the same window, we have a ... (cont.)

Any help would be appreciated

These seem to be K K casement windows. Crank handle seems ok, I have some spares and they exhibit same problem. The gears inside the plastic housing seem worn. The metal is very soft, I found them packed with a very thick grease which I cleaned out for photos. The screw in the handle is a typical ... (cont.)

the mechanism was "hidden in the window frame. I have several windows where these are stripped I ccant close the window only openthe arm says entry guard Truth 20810the length is 4 and 1/2

The window opens fine but the crank spindle backs out when i try to close it. questions 1. Can just the spindle portion be replaced? 2. Can a different crank system/handle be installed for this window ( prefer a folding style) 3. Cost for replacement parts for both items