Viewing all customer Discussions for:

39-107FK Truth Folding Handle And Cover Kit

I purchased part number 39-032 and 39-031 from you on 5/26/2022. I now need to purchase the 2 hand cranks associated with the dual arm operators that I purchased.The only numbers I see on the hand crank are US PAT des 361490ThanksFred

On the body of the unit: 40471, 25, 91. On the longer primary arm: 30470 LH. On the shorter secondary arm: L30841, 20810.

trying to locate new crank gear as a few of ours are stripped. The crank shroud is marked "Truth" and the only number is inside the handle "5054". Any help you can provide in identifying a compatible replacement is appreciated.

Hello. As you can see in the photos it is a Truth EntryGard. To my novice eyes it has three arms, a long one which is attached to the center of the window sash and two more which are attached to the top and bottom of a piece at the bottom of the sash. It is labeled with an "R" (I am guessing it sta ... (cont.)

The housing on the window operator crank cracks after many years of useage, so the worm gear no longer stays engaged when torque is applied. I need 6 of these crank mechanisms. Do I need to buy the entire window operator assembly, or can I just buy the crank mechanism? Whatever I need to buy, I need ... (cont.)

Hello,For the missing window crank, do you have a suggestion of what I could use to replace this? I would like to have it fold down. For some reason, this particular window has two different parts for cranks. On the left side, the 39-107FK Swiss product works. However, on the same window, we have a ... (cont.)

Any help would be appreciated

These seem to be K K casement windows. Crank handle seems ok, I have some spares and they exhibit same problem. The gears inside the plastic housing seem worn. The metal is very soft, I found them packed with a very thick grease which I cleaned out for photos. The screw in the handle is a typical ... (cont.)

the mechanism was "hidden in the window frame. I have several windows where these are stripped I ccant close the window only openthe arm says entry guard Truth 20810the length is 4 and 1/2

The window opens fine but the crank spindle backs out when i try to close it. questions 1. Can just the spindle portion be replaced? 2. Can a different crank system/handle be installed for this window ( prefer a folding style) 3. Cost for replacement parts for both items

Looking for covers and cranks for this window. Can't find any part numbers on it but the brand is Truth and pat. No. 4,840,075. Made in USA. Prefer a foldable crank.

WISH TO REPLACE BOTH SIDES (LEFT AND RIGHT). ALSO WISH TO GET NEW CRANK AND COVER. PART NUMBERS ARE ON THE ASSEMBLY ALSO.

We have a long reach across our 2nd story handrail to our awning windows made my Jeld-Wen. I am hoping the universal joint, ring, pole crank with hook will be the solution. Am I able to return the parts if they do not fit?

Hi, is it possible to replace this type of crank handle with your covers with a nesting or folding handles? Our cranks work fine, except we would like to have nesting handles to accommodate blinds. Thank you.

Good morning! We are renovating an old church and they have Garadco parts. What do I need to do to replace this, or what items do I need? Any help would be appreciated! Thanks!

Note: The question is related to the video: "Watch How To Repair A Casement Window Crank Operator". Hi, this video is exactly what I was looking for except that my window frame, and the trim on the sill (mentioned at 1:03 of the video), are not in wood (see pictures). How should I proceed in this c ... (cont.)

I would like to replace the crank on my Bilt Best windows with a folding crank. Does your folding crank work on my window?

Does the 39-316 operator work with the 39-107FK folding handle and cover, or the 39-375 folding handle and cover? If both are compatible, does it matter which one I choose? Does one have a shorter profile from the window to keep the outside edge farther away from blinds? Is there a third choice I ... (cont.)

I need to replace a number of broken window cranks on my Far North casement windows. Can you match the ones I have? Also, is their a new type of handle that won't interfere with shades? Thanks