Viewing all customer Discussions for:

39-545 Truth Snap-Stud Bracket

We live on the coast in oregon and the arms have rusted out. Can you identify from the picture if you might have replacements for 2 windows. I dont want to remove the current hardware yet due to the freezing weather. Thanks in advance for your help.

I need to find a Truth arm to replace the one that lost the piece that connects it to the window. Right now my tenant cannot use the handle to open and close the window because the arm is no longer attached to the window frame. The photo that I uploaded shows an arm from one of the other windows tha ... (cont.)

The crank has number Truth 31850. Other part which connects to window has number 30744.

I'm looking for this crank and the bracket that it connects to at the bottom of the window

Looking to replace some of this hardware. WeatherShield approximately 2003

Trying to replace right side. This is the left. Missing all parts for the right.

I have crestline windows that were installed in 2001. Truth is stamped on the hardware and they are dual arm however the ones i saw on the site do not connect to the bracket that is on the window. Please help if you can. thanks for your help.george

The first image shows a bracket that is snapped in place to a button (you can see the button in the second image that is part of a fixed channel that the casement window slides in. In the defective parts, the press-fit button has popped out and the attaching bracket is very rusted. I need both par ... (cont.)

Truth Part # 45136 rh

It has a mark Truth 31850. I also need the hinge to the window and all attaching hardware.

It says TRUTH on all the parts and there are the following part numbers on the unit: Base: 45251 Middle arm piece: 31850 Also, I can't take the cover off the crank so I think the one I need will have to have it attached.

Need to replace all of the parts (top and bottom) on 2 windows (left and right side)but having a difficult time determining the correct replacement parts. Truth 30905 is stamped on the bottom hinge on both the left and right sides. I would like to do the operator, hinge, link arms, stud bracket ... (cont.)

Need new crank assembly and mounting hardware.Found decal with series 7700, C-R50-32×60

Hello,I need the operator, hinges, and sash brackets. If any of the parts are available in stainless, I would prefer that. Thanks, Ian

Looking for Silverline/GU Split Arm Operator (Right Hand) and also the part for different window as sent in picture. Thanks ! Heard your finding parts for customers is fantastic

Need replacement

Need a new operator. Looks to be 10" arm. Handle says thermalgard. Truth is stamped on arm. One bracket has 40447 on it

Hello, I'm working with a homeowner with casement windows built with truth hardware that has rusted out from being in a coastal environment. I would like to order replacement parts and was looking for parts that would stand up the best in a coastal environment. Attached photos show parts with the ... (cont.)

We purchased 77 casement windows from Beechworth. Unfortunately, 4 are not working. When we turn the crank, nothing happens - nothing moves and window doesn't open. It appears that the mechanism is stripped. We need to purchase at least 4 of these (2 left and 2 right). Beechwrth went out of bus ... (cont.)

The body shows markings 45411 and the arm shows 31876. The teeth on the arm gear have broken off.