Viewing all customer Discussions for:

39-546 Truth Snap-Stud Bracket

I need to find a Truth arm to replace the one that lost the piece that connects it to the window. Right now my tenant cannot use the handle to open and close the window because the arm is no longer attached to the window frame. The photo that I uploaded shows an arm from one of the other windows tha ... (cont.)

The crank has number Truth 31850. Other part which connects to window has number 30744.

#41011 Truth left hand window opener

Hello, I need a Truth window casement operator. I also need the plastic part that anchors the locking bar that moves up and down when you lock or unlock the window. Please see the attached photos.

Looking to replace some of this hardware. WeatherShield approximately 2003

Trying to replace right side. This is the left. Missing all parts for the right.

I have crestline windows that were installed in 2001. Truth is stamped on the hardware and they are dual arm however the ones i saw on the site do not connect to the bracket that is on the window. Please help if you can. thanks for your help.george

The first image shows a bracket that is snapped in place to a button (you can see the button in the second image that is part of a fixed channel that the casement window slides in. In the defective parts, the press-fit button has popped out and the attaching bracket is very rusted. I need both par ... (cont.)

It has a mark Truth 31850. I also need the hinge to the window and all attaching hardware.

It says TRUTH on all the parts and there are the following part numbers on the unit: Base: 45251 Middle arm piece: 31850 Also, I can't take the cover off the crank so I think the one I need will have to have it attached.

Need to replace all of the parts (top and bottom) on 2 windows (left and right side)but having a difficult time determining the correct replacement parts. Truth 30905 is stamped on the bottom hinge on both the left and right sides. I would like to do the operator, hinge, link arms, stud bracket ... (cont.)

Need new crank assembly and mounting hardware.Found decal with series 7700, C-R50-32×60

Hello,I need the operator, hinges, and sash brackets. If any of the parts are available in stainless, I would prefer that. Thanks, Ian

Looking for Silverline/GU Split Arm Operator (Right Hand) and also the part for different window as sent in picture. Thanks ! Heard your finding parts for customers is fantastic

I am looking to replace this window operator including the piece that attaches to window. Here are the markings: 04/26/18 14:03 A Made in USA Truth

Hello, I'm working with a homeowner with casement windows built with truth hardware that has rusted out from being in a coastal environment. I would like to order replacement parts and was looking for parts that would stand up the best in a coastal environment. Attached photos show parts with the ... (cont.)

We purchased 77 casement windows from Beechworth. Unfortunately, 4 are not working. When we turn the crank, nothing happens - nothing moves and window doesn't open. It appears that the mechanism is stripped. We need to purchase at least 4 of these (2 left and 2 right). Beechwrth went out of bus ... (cont.)

arm operator

Please I do need right and left, complete set, including SS truck under de window, plus attachments if necessary.Fernando

Your 39-315 picture and dimensions make it look like the right dyad operator to replace the one in the first photo that I uploaded. Are a new stud and stud bracket also necessary? If so, your 39-546 picture and dimensions make it look like right part to replace the one in the second photo that I u ... (cont.)