Viewing all customer Discussions for:

39-546 Truth Snap-Stud Bracket

Good day I would like to replace the rotating arm as showed on the picture. The part that attaches to the window is loose and does not hold. SO the mechanism does not work anymore. could you indicate the righ piece to order? Thank you

These are photos of a replacement kit from Fibertec for their casement windows. I need several of these, both right and left opening, but would like to source them in the US. Here are numbers, one on each of the three arms of the mechanism. 3306R2H 10TL 19010W 3301 19010W 3303

I need to find a replacement for this window hardware

Purchased a home which was built in 1991. The windows and hardware appear to be original to the home. This window is missing parts for the casement window crank to operate correctly. There are no parts at the top to connect the channel support to and the pieces are missing at the bottom as well. The ... (cont.)

I need to purchase 3 right-handed and 3 left-handed window brackets. The part in the photo has 31850 on the arm and the crank housing has 45251 on the bottom. Thank you for your assistance!

I am looking to replace some worn hardware, install a folding bronze handle and cover with matching locks. Ideally it would come with the operator. I am also going to reverse the swing on several of the casement windows so I need to know what is a right and what is a left part number. Lock and Kee ... (cont.)

Looking to replace left and right weathershield cranks and crank seat and four window locks with compatible polished chrome hardware. Window lock latch The hinged operator has part number 6DDOOP

Rh 45136 white

It's a window that hinges from the left, marked as truth 30905 with a weathervane crank. I need The entire assembly if possible upper and bottom.

Hi, looking for this operator, it's right handed and hinged. I bought a replacement from another supplier but the arm is not hinged.Do you have this in stock?Thanks for your help,Nick

Hello. I cannot seem to locate this exact dual-arm operator. Specifically, I cannot find one with the 3-screw hole piece that screws to the window on the arm with the hinge on it. Please help!!

Can't find name of window manufacturer

Hello. Looking to see what the part numbers are for the stud bracket and crank handle that goes with the operator? According to the photo, I see the detach clip. Is the clip included? Thank you

Casement operation arm.

Just need a replacement pin for a window

My crank seems stripped window will open when pushed open

Hi - I replaced the operator mechanism for my casement window but the new operator arm would not "snap" onto the post on the sash bracket, (photos attached). I need to purchase a replacement sash bracket with embedded post to complete my repair.

Good afternoon, I recently moved into a home with many large casement windows. Unfortunately, all but one came with non-folding crank handles, which get in the way of the window treatments. I want to try to replace them with folding handles. Are you able to help me identify what parts I need to swa ... (cont.)

Hello Brilliant Swisco Folks,We need you again! We have a casement with the operator arms all rusted and discombobulated. The crank handle mechanism is fine; it was replaced a couple of years ago.The originals are all Truth parts with the following numbers: 32374, 32010, 32011. There is also a gu ... (cont.)

We live on the coast in oregon and the arms have rusted out. Can you identify from the picture if you might have replacements for 2 windows. I dont want to remove the current hardware yet due to the freezing weather. Thanks in advance for your help.