Viewing all customer Discussions for:

39-546 Truth Snap-Stud Bracket

I need not only this part but would like the whole assembly PAT 07867

I need to order the replacement of the attached photo. It does labeled with a part number. It for a casement window, that opens from left to right. Please advise. Thank you

We currently have a Wright casement operator that we are looking to replace. On the arm it has the following number 07907. On the bottom of the casement operator there appears to be a number # 7107. I think. You can see by the photo that the number is partially missing because of the hole. ... (cont.)

could you assist me in identifying this part as I need to replace it.

Trying to replace these two truth operators, can you help?

have a casement window thats 2 ft wide and can't tell who the manufacturer is. the operator is a Truth brand, arm attach point on the sash appears to be permanently pinned with no stainless spring clip to keep attached? will need that part as well if replacing operator? thanks, Mike ... (cont.)

Hello I need to buy this products . Left hand side and right hand side if you have them . Thank you .Thanh

I need 2 replacement arms. They seem to be dual arm for casement windows. They are stamped Truth 3/850 on one arm and 6d604 with an A on the other. Also need replacement sash locks for 2 windows. They are stamped Truth 45/89 w an A also. Please help.

I need these parts both right and left

Need replacement for this Truth 40056 operator please. Had to tear it out to even determine brand, model etc. so no installed photos but all parts shown.

Afternoon, I'm not sure what it's called, lol but I ordered a replacement arm for my parents crank out window. Little did I know dad replaced it years back and its not the original crank out arm. He had to take off the plate that is attached to the window. In the pics above u can see where the wind ... (cont.)

Hi Dave, I placed an order back on July 19th. Included in this order were two Sash Dyad Crank, 5" 39-187 and 39-188. I finally was able to get my contractor here to install the new window hardware. We discovered that the cranks were not the correct ones. I need Truth (manufacturer) number 45345. Ca ... (cont.)

We had previously purchased a 39-270 closer for a replacement. You show this closer as discontinued. Do you have another solution to replace this closer so the window can operate. Appreciate any help.

Casement window mfg is Silver Line. 17 yrs old. The hole in window (picture 4)is 3 5/8" wide. The arm when straight out is 8 1/2" from base to mounting hole. The long arm is 5" from joint to hole. The short arm is approx. 3 5/8" from base to joint. I tried Swisco part number 39-171, Truth Hardware ... (cont.)

I need to find the part number for this operator for PGT casement Windows WINDGUARD. I need both right and left operators. Thanks

Hi guys, I have quite a few casement windows in a house that are missing parts. Do you recognize this operator from Sierra Pacific casement windows? I need a bunch of bronze handles and bronze covers. All of the operators seem to work, just missing a bunch of other stuff. Any help would be appreciat ... (cont.)

I have a photo of my window operator for a Crestline Casement window that was purchased in 1997. I have a photo that I would like to send you. I have the dimensions written on the window operator and they may be hard to read. If so please let me know.Thank you for your help.Leah

I do not see any names or numbers on the parts.The picture is the opposite window from the one I need parts for because I can't open the other one. I need all the parts that attach to the bottom of the window and the crank parts. Thanks, Jean

I need to replace my window operator as well as the studd attached to the window. It's white colored and the window that I have is a roto G2-strkr-035. I can't seem to find what I'm looking for online.

please tell me which parts I need to order