Viewing all customer Discussions for:

39-397 RH 12-1/8" Hinge Arm Assembly, Pella

Swisco Team:I need to buy a replacement bar hinge. (Photo attached.) The bar is 14". The arm is 9 1/2".14 1/4" hinge slide9 3/4" bar5 /14" under window bar

I am seeking a hinge/roller assembly for a 40+ year-old Pella casement window, as shown in the attached photo. This assembly mounts on the bottom of the wood/aluminum-clad casement window, enabling it to slide as the roto-operator is actuated. As you can see from the photo the assembly is missing ... (cont.)

I'm trying to find just the pella window guide bar. The crank and everything else seems to be working fine. Thanks a lot for any help.

Looking for replacement non-egress hardware for a 1987 Pella casement window. Need top and bottom operator.

Casement

Hello. I'm looking for this hardware. We ordered the 39-395 and 39-394 from you, and the piece that attaches to the window is 7". The original we have in the picture is 8 3/16. Do you sell the 8 3/16??

Do you Pella window casement hinge

Please confirm the Swisco replacement crank mechanism for a 1975 Pella wood casement window, 27" x 73". Also need the hinges and lock mechanism

Looking for bottom hinge. Showed part from other window. 2 screws to attach. If set is required, OK.

Need help finding this

Looking to repair this wood Pella casement window. The hinge shoe is missing so I definitely need that. Wondering if I should be replacing the metal piece that the shoes attached to as well? Also- is the glide track replaceable? This one appears to be damaged. Thanks in advance!

Recently when I went to close this window it would not close all the way and the inside bottom corner seems to be missing a part. Attached Thank you for your assistance.Cheryl

Trying to identify which company this bottom operating arm off of a casement window has came from. I am guessing pella, but I am unsure

I need a left hand upper hinge assembly for a Pella Proline 3565 left casement window installed in 2004. I have added a photo with measurements.

Do you have these replacement parts its for a Pella window

Not sure the manufacturer. But that bottom hinge on this particular model I have never seen !! Can u please help identify

the above armature (with meqasuring tape was fastened to the peice in the other photo to form a "tee" that kept window in algnment as it opened. looking from the inside the window hinges on the right (and opens on the left). I believe the winows are about 30 years old? Thanks for any info. ... (cont.)

I have several pella casement windowsinstalled in New home built in 1989. Most are hanging out of plum while the frames have stayed plum. Lifting up and down while open you can see the white guide at the top is sloppy. Bottom guide stays intake with little movement. The support hindge measures 11 an ... (cont.)

I'm looking for all the operating parts for a pella casement window. I need top and bottom pivot slides, the locking armature, top arm, plastic slides, all parts. I have two windows that have been screwed shut and all parts removed due to rust and age and the owner wants to rebuild them so they op ... (cont.)

Hi there. after replacing the 39-175 pella hinge on my casement window, I noticed that the upper plate was bent and causing some misalignment. How do I get one of these along with the slide? Thank you.