Viewing all customer Discussions for:

81-272 1-1/2" dia Roller And Axle Kit

Hi, I am looking to replace these two wheels. The wheels are for an old (e.g., 30 plus years) aluminum framed glass sliding door. They have a single tab (i.e., F-tab) for the screw that attaches to the door frame. thank you, John

Entire roller assembly: Length: 3 1/2" Height: 1 3/4" Depth: 7/8" Wheel: 1 5/8" diameter 5/16" width ball bearing

Sliding glass door rollers. Please help me order these

Hello Swisco!I have an old sliding glass door (possibly 1970s?) that has gotten a little "gritty" with its sliding operation. I took it off of the track, and discovered that the wheel has broken. However, I was hopeful when I saw that the whole wheel module was easily removable.We've looked at our ... (cont.)

Please help identify rollers for this door. Wheel is 1.0" (in groove) and 1.23" max dia. Roller bracket is 2.4" long, 1.23" tall, and 0.73" wide (max at top) 0.56" wide (min at bottom). Tab sticking out dimension is 1.46" (from bottom of roller bracket to top of tab). Hole to hole dimension is 0.8" ... (cont.)

Need replacement rollers for old Peachtree sliding glass doirs

I ordered a few rollers from you guys, the ones we ordered 81-295 are not exactly identical and hence not fitting onto our old 1960s sliding patio door. Here's a pic of the original compared to the 81-295 (on right). Do you guys sell this part? width 5/8 height 1 5/8 depth 1 1/4 After trying ... (cont.)

My name is Michael, want to know if the part is available. If not, can I just replace the wheels? If so, is there wheel parts and tool to take the wheels off? Thank you so much for you soonest advise on what options are there for me.

I would like to replace the rollers on my mirrored closet doors (2). They are approximately 30 years old. I will upload a couple more photos in a second email.

Good morning Tom. I have a tandem ss patio roller that looks and measures the same as the 81-154, but the rollers are 1 1/2". What part # do I need?

Please let me know what roller will work for this replacement. It is 1 inch wide. The wheel is 1 1/2 wide. The frame is 2 3/8 long. Is it possible to get a replacement wheel?Thank you,Audrey

I am looking for such wheels

I need to replace my sliding glass door rollers. Pictures of the old rollers are attached. I think this door was installed in 1999 and I thought it was made by Traco, but I'm not sure of that anymore.

I looked at your 81-001 Yours 2 1/16, 1 1/8, 1 1/4, 5/8 Mine 2 /16, 1 1/8, 1 1/2, between 5/8 and 11/16 Would you have something that has the wheel diameter of 1 1/2 and the width of 11/16?

My adjuster wheel came apart

Hello, I would like to know how if you carry this item and how much it would be. I would need 2.

Both sets of rollers are shot and do not spin. I cannot locate any part numbers. The roller is 4 1/2 inches long and 1 1/4 tall and 5/8wide. The roller is pressed into a plastic piece that presses into the door. The code on the door states: code- TEI Rating- SDG-r40 Series- opera patio door MST- 51 ... (cont.)

I need to replace the roller for what I suspect to be a 1973 era sliding door. Previously, I purchased a couple rollers, however, they were not correct as the location of the height adjustment screw and the frame attachment were incorrect. As a last resort, replacing just the wheel will suffice. ... (cont.)

Are you able to recommend a replacement solution?

I have sliding glass door and both guide rollers a broken. I have no identification on the manufacturer.