Viewing all customer Discussions for:

39-398 Casement Sash Stop Device

We bought your 39-398 sash limited for our facility. These worked on the wide windows, but some sash openings are only 14" wide. There's not enough space to mount them on the bottom as the others. Can they be mounted on the open side?

Looking for a casement window opener. Manufacturer by Ives

In 2008, I installed a Milgard Single Casement series 920 aluminum casement window with an egress hinge. It's in a room that is now a baby nursery and I need to add a child safety catch of some type. The hinge in the window is a made by AmesburyTruth and I see they make a window limiter product call ... (cont.)

I'd like to be able to securely stop my casement window opening to 2-3". Would that be possible with the 39-398?

Unknown window manufacturer.... wind snapped the crank and mechanics. See pic

LOOKING FOR 4 INCH LIMIT STOPS FOR VINYL CASEMENT WINDOWS.

Window hardware sliding track brackets it is a large commercial hopper window aluminum I need the arms the bottom pivot and the locking mechanism which are in the photo any additional Information can be given the long pivot arm is approximately 14 1/4 inch if you get back to me I will give you addi ... (cont.)

Hello,The vinyl casement windows were installed about 13 years ago to replace aluminum frame ones. We have seven of the left-hand hinge ones and six of the awning style. I'd like to have operator replacements for all of them. I ordered and received five of the "39-226 Male Roto Folding Handles" fr ... (cont.)

This arm goes to a hopper or vent window in Detroit public schools old windows no info on manufacture name. overall length is 8-7/8"

This arm stops the sash from opening up past a certain point. It's 6" long Would need new arm and part that screws into sash and frame

I am looking for a part that stops a casement window opening no more than 4' if someone falls into in to the window. I leave n Memphis and that is code enforcement need for two windows.Thanks Don B

My customer brought this in. I believe that there is another half to it, but he says there isn't. One end attaches to the metal bracket on the side of sash. Please let me know if you have seen anything similar to this. Your help is greatly appreciated.Thank you,Andrew

Part needed: window restrictor to prevent the window from opening all the the way out. The part is screws to the side of the window on the inside. I have attached THREE pictures one with the restrictor highlighted and the other one for the window without the part and finally a picture for the e ... (cont.)

Looking for a simple casement limiter like in the attached picture, but in the stainless steel version. Please let me know if you have that and where I can find it in your catalog. Thanks, Noel

Can you please take a look at the picture attached and let us know if this is a limit stop that your company provided to Wausau windows for the referenced project? If so I will need pricing for new ones.

Question regarding the sash device 39-398. Once installed is there a quick way to detach the arm so that the window could be used for emergency evacuation? Also, will this device work on Milgard Sash Windows. Please advise

Part 39-398 how do you order right side or left side?

Hello, Can the sash stop be disconnected and reconnected if you wanted to fully open the window? If so, how? Thanks Raphael

I have 4 Marvin integrity windows that need aftermarket fall protection devices so the windows will not open past 4

I have a slim casement window for the bathroom. The glass window comes with two levers which you use to push the window outward & open. I keep the window open for perhaps 10 degrees, the equivalent of 1 inch at the widest part (opposite the hinge location). It stays that way in warm weather. I keep ... (cont.)