Viewing all customer Discussions for:

23-316 Bottom Jamb Bracket

Hi, I need to find a rail/upper brackets and bottom pivot brackets that will work with 2 different set of wood, bifold doors. (Full louver) The upper pivot pin is 1/4" and roller is 3/4" or 13/16" and the bottom plastic pin is 3/8" (bottom), 5/8" (top). (Half louder) The upper pivot pin is 1/4" ... (cont.)

Hi. I bought a 70s home with odd closet door sizes, I pulled out the bottom track and mostly ruined it, not knowing I'd have problems finding new doors. I would like to go ahead and continue to use these, but if possible I'd rather not use a bottom track at all. Is that possible? And what parts / ... (cont.)

Floor track was removed during remodeling . 6 ' bifold 4 doors. Would like a trackless if adapts to doors so there is not a track on the tile.

Hello, I am looking to replace the tracks (currently they are the same profile top and bottom) with a new low profile top track and floor pivot without the track. I am looking for the top track to be a silver or white finish. Do you have a kit or list of parts that would appear to work? The opening ... (cont.)

hi there, i have two different types of floor to ceiling old metal closet doors. i need to install them but i'm unsure which pieces they both need. i redid the floors so i'd love to have them only need a track on the top if possible. the height is about 94" tall and the width of each closet is aroun ... (cont.)

I'm looking to find parts to replace missing hardware to a 1970's solid wood bi-fold/pivot door.

Hi I'm looking for a new plastic pin for inside the pivot block that broken!pivot block connector is healthy but the pin is brokenThanks

This set of metal frame doors has a top & bottom track, which grabs & sticks on the bottom, especially when closing.I removed the doors & tracks to find 2 bottom (nylon/plastic?) pivots and bottom roller guides very worn.Is the bottom track necessary (I'd like to remove it altogether)?Is ... (cont.)

Need to replace upper track for old style wooden mirrored bifold doors. This is for 5 ft . Opening. Also need floor bracket as well as door pins. I have ordered track before for bedroom bifold. The ga that helped me then did an excellent job of finding track and door parts. Hoping I can replicate th ... (cont.)

Hi I have a few older metal bifold doors that were installed with the pins and a track on the top and bottom. I'd like to reinstall them with new pins and new track on the top only and use a corner jamb if possible. What parts would replace what I have? The holes in the doors for the pins are 5/16"T ... (cont.)

For 1-1/2 inch solid wood bifold doors

This door is original to the house manufactured in the 1960s. Top rails still exist in the door frames but the bottom rails are missing. Will your low profile 24" rail assembly work with this style?

I am replacing a wooden bi-fold doors with metal. They are 4-feet in length total with 4 panels. Have tile flooring and wanted to see if I can install this with just the top rail only and get by using a wooden bi-fold door bracket on the bottom. Let me know the part numbers that I need to buy. th ... (cont.)

I'm trying to re- install 3 sets of Cox bi-fold doors in my daughter's house. She was left with the doors and complete top tracks (I think). The hardware in the tracks is stamped with 43-051. He are pics of the top & bottom of the doors and what was left on the tracks. Any help with the install proc ... (cont.)

I also have an Alliance bifold door hardware. Did the previous writer have any success with this part?My bottom bracket is Alliance 510, and I need to replace a pair of them. I have attached pictures of a part from my good closet with a ruler to help with dimensions. Like your 23-301, my base is 1/4 ... (cont.)

Is there a corresponding bottom roller for 23-120 top roller? I need one of each.

do you sell this part? I want to use it instead of a bottom track for installing some slimfold bifold steel louver doors

My house in the Netherlands was built 40 years ago and now I can not find spare parts for the tracks of the wood folding closet doors. On your website I found some parts which will probably do, but I am not sure. I herewith send you a picture. I need 2 top pivot brackets nr 43-051 and 2 pins ... (cont.)

Can you tell me the size rod this bracket will take. I need one that will take a 1/4" pivot rod. Thanks!

I cannot find a manufacturer or other distinguishing features, but pic 006 is of a similar door showing a top pivot. The actual pivot rod that I need has a different pivot bracket, as shown in photo 007, where the 3/8 inch that goes into the bracket must be 1/4 inch. I also need one bottom bracket ... (cont.)