Viewing all customer Discussions for:

39-411 Ware Window Crank, RH

Hi I have a bunch of these old Jalousie windows. I am missing this complete operator part and for others I am missing the crank.

Hello. We purchased an older home and are needing to replace some units. We need to replace 3 whole units and may need to purchase 3 cranks? We took pictures of what the older home but unsure what to replace with. Thanks!!

Bought an old house built in 1959. Previous owner removed all the window handles and left only this one. trying to find replacements.

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

Handle no longer opens or closes window I sent another email with photos of window

I am looking for a few cranks that, There is no product company names, numbers, or markings. There are a few in which there are 4 screws in total and some that have one on top and two on the bottom. If you can provide me with information in which there could be a similar product in your store. ... (cont.)

alcan window probably 30 years old 2 5/16 depth 5 3/4 height includes mounting area 7/8 width not including mount

I have attached 3 window crank pictures and a hand written picture of the logo and numbers printed inside the handle casing. The part number appears to be 11500-3 2 RH. Paten number appears to be D-198, 202 U 8. RD 1963 CAN. I need at least one replacement casing and hand crank, preferably 2 ... (cont.)

I have a right and a left one that needs to be replaced.Both are the same size just a right and a left

1955 home with an 1970 addition with HomeArt windows installed in tge addition. I'm missing two right hand cranks.Please advise, thanks.

awning, 5 1/4 in mounting top to bottom mounting, 1 1/16 in between 2 bottom holes, 2 5/8 in arm, 3/8 dia arm holethank you

Time ago I saw in the internet that this operators might work for marva security windows Theses are the pictures I have of that actual operator. Unfortunately, they are all rusted and I cannot see any numbers in any of the parts. The height is 4 1/2 inches and at the center, the width is a little le ... (cont.)

I am missing the handles on these 3 mechanisms. Looking inside, there is a gear to the side. No visible markings on mechanism. Windows are closed and I'm not sure how to remove the mechanism if I need to replace the entire mechanism. Do you have replacement handles? Your help and advise would be ... (cont.)

Need right hand operator. no identifying names/numbers. The closest match for length of link arm that i can find on your site is 2-3/16. i have measured twice and mine is actually 2- 5/16 to 2-3/8 (not sure if being short will work). I located closest operator that I could find on your site (met ... (cont.)

Looking for replacement part

Looking for replacement window cranks for Aluminum Louvered Windows. I found a number on the inside of the window crank: 4714-B R. Please let me know if you have the replacement part. Thanks, Mike Y

I just purchased the model 39-411 operator and am running into a few issues to use it a a replacement operator for my Marva windows: 1) The mount holes are too small. I had to enlarge them to 1/4" to allow the mounting screws to fit. 2) The arm is mounted on the wrong side of the lever. The arm ... (cont.)

Ware right hand window crank, markings, Miami, FLA Crank works, BUT It will not close.Remove handle, inside is a screw,theappn the inner workings of the "box". Can I just purchase a replacment screw and not the whole crank hardware? do you have this item? The whole assembly in your catalogue ... (cont.)

The window awning we have is similar to the Barton Kramer #234 Pan-Am Right Hand Operator

Please see the attached pictures. We are looking for this window crank. Please email us the price and info if you can find it.