Viewing all customer Discussions for:

39-412 Offset Single Arm Operator, 9-1/2

Looking for replacement window crank for casement windows

Hello, I need a window operator that will fit with the strike plate on it. See my pictures attached. The arm is straight.

I'm looking for window crank handle replacements. To right side and two left side. The product has an etching on it from Nordic, apparently the manufacturer. The home was built around 1980, and this is the original window hardware. From the point about which the crank pivots to the tip of the cra ... (cont.)

Need replacement parts for casement windows for both left and right side. I have included pictures of the left side casement so would need part number for right side as well. The mechanism arm is 7.5" from the bend to the roller. Also, looking at Outside Pic2.jpg shows the mechanism mounted with ... (cont.)

Need handles to fit Truth casement window operators; your #39-013

These are windows from 1972, wood framed. I'm not sure who the manufacture was. the handles appear to be stamped 'CAPADCO' I didn't see any that clearly matched on your Website.

Do you guys carry this crank? No markings on window

I am needing covers and cranks for Jeld Wen Casement windows with this hardware. I am looking for both left and right versions in white with a folding handel/crank.

4'' x 1 3/8 no marking that i can see

I'm looking for this part of window

I need a right hand and a left hand operator for the windows that do not have any identification on them . I don't know how you're measuring from to get approximately nine. It could be 9 and 1/2 or 10 but I measured from the bend

The Bracket on the exterior of the window #3 closed side snapped. I am trying to replace the mechanism instead of the window. Can you help me with the parts I would need?

Hi. I was wondering what the difference is between the 39-027E Ellipse style single arm operator and the 39-412 Offset operator. The descriptions for both are the same. Thanks

I replaced my c.1985 Truth casement window operators on ten windows last year using 39-014 and 39-013 operators. I now am replacing six on the same brand of windows but they are narrower and have 9 1/2" arms instead of 13 1/2" arms. I think the same operator with the shorter arm are 39-412 and 3 ... (cont.)

The part has Truth 45251 stamped on it. The arm is 9" long when measured from the gear. It has Norco stamped oh the crank.

Norco wood casement window. D Series JEL N 329 Need left and right cranks. Also need 2 sets of hinges for the same type windows

Only marking is on the crank knob, 4 screws in the base, approx. 8" arm with wheel on the end. Need 2 right side casement operators.

Hello also looking for cranks, crank arms and window keeper and slide keepers as shown

Gears slip as opening window and closing, the handle assembly gear seems ok, all I see on crank is stamped word Truth 30818. Right side is that all I need to replace crank assembly. Please not this is a right side crank needing replaced but the photo is left side crank

The operator is loose and has a lot of play in it when the window is open. Would like to replace.