Viewing all customer Discussions for:

39-422 2" Extension, 3/8" Spline

Might you have something that would replace this?? Miami Window Corp. Pat No. 2383912 PatsPend Miami Fla

Do you have a replacement handle and extension that will fit this window crank assembly? The current handle sits too close to the granite. Thanks

good day. Having trouble finding the existing crank I have. The reason I'm replacing is because having the window open the wind moves the window back and forth rather then the window keeping still. I'm thinking the pin has worn down. Also is there such thing as a crank extension ? My existing crank ... (cont.)

I am trying to replace the handle on a jealousy window. I already ordered part 39?108. The 3/8 part fits perfectly but the T hits the side box mechanism. So I either need one that is a longer Spline I believe that's what you call it or the T part of the handle is shorter.

will an old style Pella window crank handle fit on this extension? Pella 39- 109b Thanks, Al

It has "Miami window Corp, part number 2383912" cast on it. It has a longer crank compared to your 39-054. There is a tile wall next to and below the window.

We need an extension to the window crank. We had plantation blinds installed and the regular cranks will not turn because of the frame of the plantation blinds. We have tried several cranks available at the box stores and they have not worked. We ordered a crank from you we just sent back. It ... (cont.)

Need extensions for Anderson casement window cranks of about 2" I believe your part # 39-422

So I'm looking for a bit piece that I could run to a power drill so I can fit over that little metal piece to roll the window down and up. As my hillbilly powered windows. It is also a small piece.

In the first picture the threads are below the sill. Need an extension. In the other 2 we are removing the wooden sill and replacing with granite which will make it 3/4" thicker so need extensions for those 2 Windows. I measured these as 5/16, 12 teeth. Also need the hoods that are missing ... (cont.)

I have Anderson Windows that they put shutters on now I need extenders so we can open the widows will your cranks work.

I just purchased (4)of items 39-124 for a project that I am doing which I thought was going too work but they did not. Could you tell me if you have an extension like this one(same length)that fit an Anderson Window crank. Thank you

We are adding shutters to Anderson casement windows and need an extension to allow the windows to open. Will the #39-157 extension with 11/32 spline fit the Anderson hardware???

I am looking for 6, 2" extensions, and four 2" crank handles. With screws for mounting the two to the window crank. I gave you the measurements. The extension is 2" long, I need 6 of them, the crank handle shaft is 1.5/8" in length. and the screws are 3.5/8 to bottom oh head. There are no names ... (cont.)

Do you know if these handle extensions would work on Anderson Casement Windows?

I need a 3/8 inch to 3/8 inch extension for older casement windows 2,3 or 4 inches long. Do they exist?

do you have these handles with extensions in stock?

Hi. Would you please help me find a replacement for the handle in these photos. The bore hole is 3/8". I purchased the folding crank handles 11/32" but they were too tall for the window frame, I completely got it wrong. Thanks!! Mary

I need a 4" extension for a gray aluminum window crank. The only identifier is a number (45054) underneath in the recessed of the handle. The 39-422 looks ideal but is only 2". Do you have this in 4"?Many thanksPhilip

Hi, I would like to add an extension to my handle. The window is over our kitchen sink and also has a long window sill. Can I do this with my existing operator. If so, what parts do I need to purchase. If I can't, how do I know what replacement operator to choose along with the appropriate extens ... (cont.)