Viewing all customer Discussions for:

26-229 Right Hand Tilt Latch, 2-1/8"

hi, Looking for replacement parts in picture. I think the mfg. of the windows was Vinyl Tech. Thanks Jim

I need to replace the broken window latches that allow the windows to fold in or out to allow cleaning.

See photos:Latch dimensions: 3 1/4" x 1 5/16" x 5/16" H SHOE dimensions:2 1/16" L1 1/4" W1/2" HSash balance dimensions:Rod 28" Red rod typeRod width is 9/16"

Looking for window latches

I need a replacement set (LH & RH) of these tilt latches. They are internal mount for the lower sash. The window was manufactured by Soft Lite which is no longer in business.

We need to replace several internal latches as the i.age above illustrates. It appears there is also a spring. The latch slides into the window when the handle is popped off. Thanks

I'm searching for the same part (Pat# 5,139,291) however my customer's window latch is set up a little different than most that I'm seeing. The catch/keeper on the bottom of the clip body needs about a 3/8" setback. Can you tell me how far from the outside edge of the body (not the top plate or th ... (cont.)

I would like to replace my broken tilt latches with surface mounted tilt latches. I do not know the brand of window I have. Could you recommend which of your surface mounted, tilt latches would fit my window? Thank you, Russell

I need a bunch of these window tilt buttons. Most of the hooks I. The bottom section have broken off and no longer work to tilt the windows. Please help me locate this part. Thanks

I Having trouble locating Tilt laches for a few of my windows These are mounted inside need to remove the sides of the window to install them attached are some pic and the label on the window I hope you can help me to find something that will work

Looking for this replacement part.

Need to replace several of these in rental unit. Your 28-228/28-229 seem to be the closest dimensionally. Cannot tell if your unit has screw posts extending below edge of top shell (posts fit into holes in existing vinyl glass frame).

I am missing a metal bar that attaches to the spring on the bottom sash. Also missing two latches for the tilt out sash. I have not been able to identify the knight/dragon logo on the latch to determine brand of window.

There are no manufacturers labels or information. These windows are old and of an unknown age. Top is 2 inches in length by 7/8ths inch wide. The clip under the center is 1/2 inch.

I am looking for replacements for these tilt window latches

on a vinyl jeldwin double hung window looking for the bottom internal tilt latch both right and left

My Mastic windows were installed in 2001. Most are in really good shape except for the tilt latches have snapped off in a few. Do you have parts to replace them? It looks as though they just snap in -- no screws.

Hello swisco Im trying to hunt down 4 of these window sash tilt latches and 1 window lock. There are no bugs on the window or any stickers on the frame to figure out who manufacturered these windows. Please advise on a replacement or similar that could work. Thx

Pivot bar And tilt latch replacement

I'm looking for this part the you switch the lever and you can tilt out the windows...tilt release. HELP! Thank you!