Viewing all customer Discussions for:

26-229 Right Hand Tilt Latch, 2-1/8"

Where can I get replacements for this cover piece? It covers the spring that opens the window outward so that it can be cleaned on both sides of the glass. No stickers on window, but part is "Boreal". 1st picture is one of the pieces intact; other pictures are the broken covers. I appreciate your ... (cont.)

Internal tilt latch for a window

sliding window latch for Vinyltech windows. measures 2 1/16" on center from screw holes. 1 3/8 x 3 1/4" outer dimensions. will need three sets of left/right.

I am afraid I am having a hard time visualizing the part being described. Could we have you upload an image or two of the hardware in question? With images we can determine whether or not we can offer an alternative.

tilt stop newpro window

This is the part that keeps the windows from folding in and a bunch have broken as seen in the picture

I believe the part number is 85-842. Looking for six. Thanks

No markings found Lock 4788.jpg length is 3 9/16" Depth is 1" overhang is 6/8"

Do you sell anything like this I have not been unable to find anything like it on the Internet. I would be very appreciated if any information can be given to me thank you.

Need a replacement window lock

need 8 of these. black dot on latch is location of other insert tab

You were extremely helpful two years ago in identifying the correct window shoe. Now, I need your help identifying the window piece pictured above.Thank you kindly,Susan

I need 4 of the metal bottom pieces, two top latches. A16 inch spring and two brake shoes. Any help would be greatly appreciative. Thank you

Hi Could you please identify these part with price.Need a lock balance holder . Thanks

Attached are photos of my latch and the sash release lever 26-119 for comparison. The dimensions of my latch are 2" x 3/4" (same, but not critical). The "feet" (one missing) are 1/2" (out to out) where the 26-119 is 1/2" also. The length of the foot is 5/16" with the "toe notch" at 1/4". The 26 ... (cont.)

The clips break easily when the window is snapped back into the frame after cleaning I'm looking for replacement clips.

One pin is broken and is missing.If you find that piece I need five of them.

I need 11 right and 11 left please.

Hello, The pivot pin is 2 3/8" long and 3/4" wide. The screw holes are 1 3/16" and 1 7/8" o/c from the pin side. I would appreciate Any help you can provide in supplying me with this part. It is the pivot pin for a double hung tilt in window. I also need to replace the spring-loaded release clips/ ... (cont.)

Do you carry this type of tilt window latches. They screw into top of window under plastic molding. It?s a half inch wide and 4&1/2 to 5 inches long. Thanks for your help.